The use of the wear-free wire thread inserts not only repairs the thread, but also increases the thread load-bearing capacity.
Application:
1. Drill out the defective thread with the enclosed drill
2. Check the tap and threaded bolt.
3. Cut the holding thread with the special tap.
4. Turn the thread insert into the holding thread.
5. Remove the tang with the tang breaker.
An illustrated instruction with English explanation is included in the set.
Scope of delivery:
- 1 pc. twist drill
- 1 pc. Thread tap
- 1 pc. Installation tool
- 1 pc. Tang breaker
- 15 pcs. Wire thread inserts (1.5D)
Other useful tools for thread repair or as a helicoil replacement can be found in the accessories section.
| Material | Steel |
| Area of application | Workshop accessories |
| Dimension thread insert | 1.5D |
| Total length | 15 mm |
| Nominal diameter (thread) | 10 mm |
| Number of components | 20 pcs |
| Storage method | Plastic box |
| Thread type | MF10x1 (fine pitch thread) |
Ratings
Accessories & related products
HeliCoil thread repair set M6 (professional tool)
Storage method: Suitcase · Manufacturer: HeliCoil · Storage box dimension [mm]: 180 x 165 x 45 mm · Area of application: Workshop accessories · Material: Chrome steel (colloquially known as stainless steel) · Surface: coated · Number of components: 60 pcs · Nominal diameter (thread): 6 mm · Dimension thread insert: 1D · Dimension thread insert: 1.5D · Dimension thread insert: 2D · Ø bore: 6.3 mm · Thread type: M6x1 (standard thread) · Total length: 6 mm · Total length: 9 mm · Total length: 12 mm
EUR 95.50
Repair kit spark plug thread M14x1.25
Material: Steel · Area of application: Workshop accessories · Surface: burnished · Surface: galvanized (blue) · Total length: 11.3 mm · Total length: 17.5 mm · Total length: 70.4 mm · Ø bore: 14 mm · Nominal diameter (thread): 14 mm · Storage method: Plastic box · Number of components: 16 pcs · Storage box dimension [mm]: 19 x 105 x 40 mm · Ø outside: 17.4 mm · Thread type: MF14x1.25 (fine pitch thread)
EUR 68.10
Explore categories from Screws & fastener sets
Moped fans also bought
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 4 mm · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø bore: 4.05 mm
EUR 22.60
swiing® revival exhaust nut M35x2 galvanized | Sachs 50/2 (A1507)
Ø inside: 30 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Union nut · Ø outside: 43 mm · Thread type: M35x2 (standard thread) · Pony OEM number: A1507 · Sachs OEM no.: 0242 048 101
EUR 17.80
Not in stock
Carburetor 17 mm Bing SSB 1/17/69 reproduction
Nominal diameter: 17 mm · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SSB · Ø fuel hose connection: 6.2 mm · Width: 86 mm · Mounting type: Stud bolts & nuts · Hole spacing inlet: 31 mm · Total length: 116 mm · Mixed oil connection: No · Vacuum connection: Yes · Height: 99 mm · Choke control: without choke · Nozzle thread: MF7x0.75 (fine pitch thread) · Camouflaged: No · Nozzle size: 76 · Area of application: Standard · Area of application: Tuning · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 95.50
Shaft seal NBR 14.96x31.5x3.5 Pinion shaft | Sachs 502, 50/2, 503 (A1134)
Manufacturer: Sachs · Material: NBR · Area of application: Standard · Surface: coated · Width: 3.5 mm · Ø inside: 14.96 mm · Place of use: Pinion shaft · Temperature resistance (min.): -30 - 100 °C · Ø outside: 31.5 mm · Pony OEM number: A1134 · Sachs OEM no.: 0230 011 100 · Sachs OEM no.: 0230 011 200
EUR 8.95
Collection only possible with online purchase and appointment.
