Silicone tank emblem «Ciao» for your Piaggio Ciao moped / moped.
The sticker has the look of brushed aluminum and the golden yellow border around the lettering adds a visual accent.
The change from the small to the large stickers took place on the Ciao in the middle of the SC model series. As a result, this 115x27 mm sticker fits into all large tank inserts of the SC, PX and C24 models.
From the factory, this 3D sticker was installed in Switzerland on early C24 models from 1998 onwards, and was then replaced by the colored and cut-out «Ciao» 3D sticker on the last models produced before 2006.
Sticker dimensions: 115x27x2 mm
Material: silicone
Durability: petrol resistant
Price per piece.
The area to be covered should be free of grease and dirt in order to provide a firm hold for the adhesive.
You will find suitable cleaning cloths and other decals in the accessories section.
Quality product from the Italian manufacturer Piaggio in original equipment quality.
Original Piaggio spare part number: 813875
Alternative to the original Piaggio spare part number: 298723, 814489
| Manufacturer | Piaggio |
| Material | Silicone |
| Rear side texture | Adhesive |
| Thickness | 2 mm |
| Width | 115 mm |
| Height | 27 mm |
| Mounting type | glue |
| Piaggio OEM number | 813875 |
| Alternative version of the Piaggio OEM number | 298723, 814489 |
| Piaggio | Ciao - C24 |
Accessories & related products
Tank sticker "PIAGGIO" 3D silicone 115 x 27 mm original | Piaggio Ciao, SI, Bravo
Manufacturer: Piaggio · Place of use: Tank (+ frame) · Color: black · Color: silver · Material: Silicone · Total length: 115 mm · Width: 27 mm · Rear side texture: Adhesive · Height: 1.5 mm · Consistency: petrol resistant · Transferfolie: No · Piaggio OEM number: 298723
EUR 15.90
Tank sticker "Ciao" 3D silicone 109 x 25 mm original | Piaggio Ciao
Manufacturer: Piaggio · Color: Chrome · Color: orange · Material: Silicone · Width: 109 mm · Rear side texture: Adhesive · Height: 25 mm · Thickness: 1.2 mm · Alternative version of the Piaggio OEM number: 298723 · Alternative version of the Piaggio OEM number: 813875 · Piaggio OEM number: 814489
EUR 17.10
Sticker gel "KAT" left & right side protection | Piaggio Ciao, SI, Grillo
Place of use: Housing cover · Color: black · Color: gold · Color: gray · Surface: rubberized · Color: yellow · Material: Silicone · Width: 155 mm · Rear side texture: Adhesive · Height: 22 mm · Consistency: UV-resistant · Consistency: petrol resistant · Border: contour cut · Transferfolie: No
EUR 26.50
Explore categories from Gasoline & Tank
Moped fans also bought
Handlebar fork plate 24 cm Franz black
Color: black · Surface: varnished · Material: Steel · Fork plate holder length: 60 mm · Width: 450 mm · Height: 240 mm · Clamping diameter: 22 mm · Ø outside: 22 mm · Length handlebar ends: 180 mm · Mounting type: Fork plate · Crossbar: Yes · Ø Strut: 12.5 mm · Strut length: 160 mm
EUR 49.10
Not in stock
Hot 
swiing® ingenious 17 mm SRF carburetor camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Manufacturer: swiing® ingenious parts · Nominal diameter: 17 mm · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 5 mm · Total length: 65 mm · Nozzle size: 74 · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Width: 47 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 27.5 mm · Height: 89 mm · Height: 109 mm · Mounting type: Plug connection clamped · Mixed oil connection: No · Area of application: Tuning · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.2 · Camouflaged: Yes · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 147.60
GPO sprocket 35 - 57 teeth black | Puch Maxi S, N / X30 NG-2AH
Manufacturer: GPO · Material: Steel · Surface: varnished · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Number of teeth: 35 pcs · Number of teeth: 36 pcs · Number of teeth: 37 pcs · Number of teeth: 38 pcs · Number of teeth: 39 pcs · Number of teeth: 40 pcs · Number of teeth: 41 pcs · Number of teeth: 42 pcs · Number of teeth: 43 pcs · Number of teeth: 44 pcs · Number of teeth: 45 pcs · Number of teeth: 46 pcs · Number of teeth: 47 pcs · Number of teeth: 48 pcs · Number of teeth: 49 pcs · Number of teeth: 50 pcs · Number of teeth: 51 pcs · Number of teeth: 52 pcs · Number of teeth: 53 pcs · Number of teeth: 54 pcs · Number of teeth: 55 pcs · Number of teeth: 56 pcs · Number of teeth: 57 pcs · Ø bolt circle: 106 mm · Ø inside: 94 mm · Ø mounting hole: 6.7 mm · Cranking (offset): 8 mm · Color: black
EUR 24.50
Hot
swiing® ingenious intake manifold 17 mm SRF camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø inside: 17 mm · Total length: 38 mm · Hole spacing inlet: 38 mm · Ø External connection: 23 mm · Number of fixing points: 2 pcs · Mounting type: Stud bolts & nuts · Total height: 53.5 mm · Height flange center hole: 42 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Camouflaged: Yes
EUR 55.30
Working late? Evening hours on Thursday until 20:00
