High-quality M11x180 thru axle made of galvanized steel for the front wheel on various Monark mopeds/mopeds.
The front axle with M11x1 mm thread is made of extremely durable special steel.
The ends are chamfered and the thread is perfectly cut. This makes it easy to fit the cones and wheel nuts.
Matching axle nuts can be found in the accessories section.
Nostalgic product for the highest standards from the swiing® quality brand.
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Ø shaft | 10.95 mm |
| Shank length | 30 mm |
| Total length | 180 mm |
| Thread type | MF11x1 (fine pitch thread) |
| Thread length | 75 mm |
| Monark |
Accessories & related products
Nut M11x1 x 10 SW19 Wheel nut galvanized
Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 1D · Thread type: MF11x1 (fine pitch thread) · Nominal diameter (thread): 11 mm · Drive: External hexagon · Width across flats: 19 mm · Height: 10 mm · Strength class: 8 · Area of application: Standard
EUR 3.05
swiing® revival nut M11x1 x 10 SW17 wheel nut Inox
Material: Chrome steel (colloquially known as stainless steel) · Manufacturer: swiing® revival parts · Nut type: Hexagon nut 1D · Thread type: MF11x1 (fine pitch thread) · Nominal diameter (thread): 11 mm · Drive: External hexagon · Height: 10 mm · Width across flats: 17 mm
EUR 7.90
swiing® revival wheel nut M11x1 x 4 SW17 Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Nut type: Hexagon flat nut · Drive: External hexagon · Thread type: MF11x1 (fine pitch thread) · Nominal diameter (thread): 11 mm · Height: 4 mm · Width across flats: 17 mm
EUR 7.25
Bearing cone M11x1 mm
Material: Steel · Color: graphite colors · Ø outside: 19 mm · Height: 12 mm · Surface: gas nitrided · Thread type: MF11x1 (fine pitch thread) · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Ø ball [inch] / [mm]: 3/16" (4.78 mm) · Ø ball [inch] / [mm]: 7/32" (5.56 mm) · Width across flats: 15 mm
EUR 9.75
swiing® revival nut M11x1 x 4 SW17 wheel nut galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Thread type: MF11x1 (fine pitch thread) · Nominal diameter (thread): 11 mm · Drive: External hexagon · Width across flats: 17 mm · Height: 4 mm · Strength class: 8
EUR 3.55
Explore categories from Hub & axle
Moped fans also bought
Hot 
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Nipple length: 10 mm · Number of components: 1 pcs · Area of application: Standard
EUR 2.95
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Bearing type: Ball ring · Stock number: K042 · Inner ring width: 25 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing cage: Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Area of application: Standard · Material: Steel · Width: 6.8 mm · Ø outside: 36 mm · Ø inside: 25 mm
EUR 9.75
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
EUR 13.40
EUR 29.78/l
Nut M11x1 x 10 SW19 Wheel nut galvanized
Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 1D · Thread type: MF11x1 (fine pitch thread) · Nominal diameter (thread): 11 mm · Drive: External hexagon · Width across flats: 19 mm · Height: 10 mm · Strength class: 8 · Area of application: Standard
EUR 3.05
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
