Complete swingarm bearing for the rear swingarm of Sachs and Alpa mopeds, mopeds and small motorcycles.
Please make sure in advance that the dimensions of your installed bushings / axle match, as there are different versions.
Dimension of bushings:
Ø inner: 16 mm
Ø outer: 22 mm
Length: 20 mm
Material: Brass
Dimension of swingarm bolt:
Ø shaft: 16 mm
Shaft length: 90 mm
Thread: M12
Material: hardened steel
The black brünished and ground swingarm axle is fitted with a special nut, also hardened, and three spacers. The enclosed shim washers with thicknesses of 0.2, 0.5 and 1 mm make it possible to eliminate any axial play in the swing arm bolt.
Nostalgic product for the highest demands of the quality brand swiing®.
The set includes the following fixed parts:
Details
| Manufacturer | swiing® revival parts |
| Material | Steel, Brass |
| Surface | Hardened |
| Drive | Hexagon socket, External hexagon |
| Thread type | M12x1.75 (standard thread) |
| Ø Bearing inside | 16 mm |
| Ø axle | 12 mm |
| Ø External bearing | 22 mm |
| Total length | 90 mm, 20 mm |
| Ø inside | 12 mm |
| Ø outside | 16 mm |
Suitable for the following models
| Sachs | |
| Alpa Chopper / Turbo |
Accessories & related products
CRC Grease high temperature 100 ml
Temperature resistance (min.): -30 - 150 °C · Manufacturer: CRC · Contents [ml]: 100 ml · Area of application: Chemistry · Area of application: Fat · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous
EUR 15.40
EUR 154.00/l
Moped fans like you also bought:
NTN wheel bearing 12/28/8 rear cast hub Leleu | Puch Maxi
Manufacturer: NTN · Material: Plastic · Material: Steel · Surface: blank · Bearing cage: "-" Sheet steel cage ball-guided · Inner ring width: 12 mm · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CM (special/noise-reduced) · Groove ring: No · Stock number: 6001 · Bearing type: Deep groove ball bearing · Width: 8 mm · Ø inside: 12 mm · Ø outside: 28 mm · Ball bearing closed: Yes · Area of application: Standard
EUR 7.25
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø bore: 4.05 mm · Ø Pin: 4 mm · Color: gray
EUR 23.20
Cut cable set Black | Sachs Automatic
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Cylinder · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Color: black · Quantity: 4 pcs · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Total length: 1600 mm · Total length: 1650 mm · Total length: 1850 mm · Outer shell length: 2000 mm · Total length: 2200 mm
EUR 26.90
swiing® revival clamp brake cable | Pony / Cilo (P8343)
Material: Steel · Surface: galvanized (blue) · Manufacturer: swiing® revival parts · Number of components: 3 pcs · Drive: External hexagon · Thread type: M6x1 (standard thread) · Ø Cable bushing: 2.9 mm · Screw head: Hexagon · Total length: 17 mm · Ø shaft: 8.5 mm · Ø outside: 12 mm · Thread length: 9 mm · Width across flats SW: 10 mm
EUR 4.20
MKX shock absorber 31 cm black
Manufacturer: MKX · Material: Aluminum · Material: Steel · Surface: varnished · Damping type: Spring · Color: black · Adjustable: Yes · Ø outside: 46 mm · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Number of fixing points: 2 pcs · Ø spars: 24 mm · Mounting type: Nuts & bolts · Hole spacing: 310 mm
EUR 61.30
Collection only possible with online purchase and appointment.
