Extension for the fuel dabber on Bing carburetors.
Fits Bing SSN, SSE, SRF, 85, SRA, SSB and many more.
Depending on the shape of the dabber, the extension must be fixed with a little glue, which you can find in the accessories section.
Swab extension length: 69 mm
Ø inside: 8.3 (slightly tapered)
Nostalgic product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Component group Carburetor | Adjusting screws, float, etc. |
| Material | Plastic |
| Carburetor type | SRE, SRF, SSN, SSE, SRA (1/11/35) Velux, SRA (1/11/31) Velux, SSB, SLA |
| Total length | 69 mm |
| Color | black |
| Ø inside | 8.3 mm |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL , AML 50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS) , LKH (4.5 PS) 503 - AAL , ABL , 2AL / 2BL , AB , AC 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT) , 2A (HG) 508 - 1 A 535 |
| Zündapp Belmondo | |
| ILO / JLO | |
| Kreidler | Flory MF |
Accessories & related products
swiing® revival swabs short Bing SRE, SSN, SSE, SRF, 85, SRA
Ø inside: 2.5 mm · Ø outside: 8 mm · Total length: 25 mm · Manufacturer: swiing® revival parts · Component group Carburetor: Adjusting screws, float, etc. · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: SSE · Carburetor type: SSN · Carburetor type: 85 · Pony OEM number: A2430 · Sachs OEM no.: 0281 109 000
EUR 4.80
swiing® revival choke extension Bing carburetor
Manufacturer: swiing® revival parts · Material: Plastic · Component group Carburetor: Choke control · Ø outside: 6 mm · Ø outside: 8 mm · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: SSN · Total length: 50 mm · Ø inside: 3.25 mm · Choke control: Hand choke
EUR 7.25
Loctite superglue 3 g (401)
Manufacturer: Loctite · Material to be used: porous materials · Area of application: Chemistry · Color: transparent · Contents: 3 g · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Temperature resistance (min.): -40 - 140 °C · Type of application: 1K · Alignment time: 5 sec
EUR 17.10
EUR 5’700.00/kg
Dab long Bing SRE, SSN, SSE, SRF, 85, SRA
Material: Plastic · Material: Steel · Component group Carburetor: Adjusting screws, float, etc. · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: SSE · Carburetor type: SSN · Carburetor type: 85 · Color: white · Ø outside: 6 mm · Ø outside: 8 mm · Ø Passage: 2.5 mm · Total length: 25 mm · Total length: 40 mm
EUR 4.70
Moped fans also bought
swiing® revival stud bolt inlet/outlet M6 x 30 (10.9 strength)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Total length: 30 mm · Thread length: 12 mm · Strength class: 10.9
EUR 2.20
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Nipple length: 5 mm · Number of components: 1 pcs · Area of application: Standard
EUR 2.95
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Material: Sealing paper · Component group Carburetor: Sealing, revising · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø outside: 45 mm · Thickness: 1.5 mm · Ø inside: 41 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
EUR 3.45
GPO gasket set carburetor Bing SRE
Manufacturer: GPO · Camouflaged: No · Material: Sealing paper · Component group Carburetor: Sealing, revising · Carburetor type: SRE · Ø outside: 12.2 mm · Ø outside: 45 mm · Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm · Ø inside: 7.8 mm · Ø inside: 41 mm
EUR 6.00
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Width: 50 mm · Ø Inside entrance: 15 mm · Total length: 66 mm · Height: 95 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m · Area of application: Tuning · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 98.30
swiing® revival choke extension Bing carburetor
Manufacturer: swiing® revival parts · Material: Plastic · Component group Carburetor: Choke control · Ø outside: 6 mm · Ø outside: 8 mm · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: SSN · Total length: 50 mm · Ø inside: 3.25 mm · Choke control: Hand choke
EUR 7.25
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
