Original luggage carrier for your Puch X30 moped / moped.
Absolutely perfect fit and top quality!
The luggage carrier is powder-coated.
The springs and the handlebar are made of chrome steel.
The clamp is chrome-plated.
Scope of delivery as per photos.
Further details and attachments can be found under accessories.
Nostalgic product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Aluminum |
| Surface | powder-coated |
| Color | white |
| Mounting type | Nuts & bolts |
| Number of fixing points | 8 pcs |
| Wheel size | 17 " |
| Puch | ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) |
Ratings
Accessories & related products
swiing® revival springs luggage carrier pair Inox | Puch X30 Sport
Ø wire: 2.65 mm · Ø inside: 7.2 mm · Ø outside: 12.5 mm · Total length: 95 mm · Manufacturer: swiing® revival parts · Leg length: 83 mm · Length spring hook: 35 mm · Material: Chrome steel (known as Nirosta®) · Surface: electropolished · Place of use: left · Place of use: right
EUR 36.80
swiing® revival luggage carrier silver | Puch X30 Sport
Manufacturer: swiing® revival parts · Surface: powder-coated · Color: silver · Material: Aluminum · Material: Chrome steel (known as Nirosta®) · Wheel size: 17 " · Ø mounting hole: 5.4 mm · Ø mounting hole: 6.7 mm · Total length: 400 mm · Width: 150 mm · Width: 159 mm · Height: 17 mm · Height: 50 mm · Mounting type: Nuts & bolts · Number of fixing points: 8 pcs · Hole spacing: 40 mm
EUR 270.20
Moped fans also bought
swiing® revival gasket set Z50 engine | Puch X30 NS / NL
Manufacturer: swiing® revival parts · Material: Sealing paper · Ø outlet inside: 22 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 · Number of components: 10 pcs · Hole spacing outlet: 42 mm · Area of application: Standard
EUR 24.50
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Manufacturer: swiing® revival parts · Material: Nylon · Surface: blank · Ø inside: 16.2 mm · Bearing type: Plain bearing · Ø outside: 20.2 mm · Total length: 19 mm · Color: black · Ø Bundle: 24.1 mm · Puch OEM number: 349.1.42.005.1
EUR 3.05
Handlebar fork plate 40 cm curved with chrome strut
Manufacturer: Made in Germany · Material: Steel · Surface: chrome-plated · Color: Chrome · Width: 730 mm · Fork plate holder length: 100 mm · Height: 400 mm · Ø outside: 22 mm · Length handlebar ends: 150 mm · Clamping diameter: 22 mm · Crossbar: Yes · Ø Strut: 14 mm · Strut length: 320 mm · Mounting type: Fork plate
EUR 44.10
swiing® revival clutch spring 2-disc version | Puch Z50
Spring design: Pressure spring · Ø wire: 4 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: raw · Number of components: 1 pcs · Color: gray · Ø outside: 39 mm · Ø inside: 30.5 mm · Total length: 19.5 mm · Area of application: Original · Area of application: Standard
EUR 22.00
swiing® revival 17" front fender Inox | Puch X30 NS, NL, NG-2AH, N-2AH, Sprinter
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: polished · Folding the ends: closed folded · Color: Chrome · Shape of the mudguard: partly round · Mounting type: Nuts & bolts · Total length over ends: 565 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 40 mm · Total height from support surface to top edge: 185 mm · Wheel size: 17 "
EUR 67.50
swiing® revival 17" rear fender Inox | Puch X30 NS, NL, NG-2AH, N-2AH, Sprinter
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: polished · Folding the ends: closed folded · Folding the ends: not folded · Color: Chrome · Shape of the mudguard: partly round · Mounting type: Screws · Total length over ends: 635 mm · Scope: 1005 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 40 mm · Total height from support surface to top edge: 320 mm · Wheel size: 17 "
EUR 85.90
Collection only possible with online purchase and appointment.
