Single fork spring for your Piaggio Si Europe, Si PTT, Bravo 2 and Bravo 3 (Super-Bravo) as well as Boxer BTV1 and BTV2 moped / moped.
This is the reinforced spring from the Piaggio Si PTT model with a wire diameter of 4 mm. Springs with a wire diameter of 3.5 mm were installed ex works on the other models listed.
Ø wire: 4 mm
Ø outer: 36 mm
Ø inner: 28 mm
Total length: 170 mm
Surface: raw, polished
Price per piece.
Note: The fork spring does not fit the Piaggio Si Montecarlo with telescopic fork or the first Bravo model with spoke wheels and rear light on the mudguard.
Wearing parts as well as complete forks for your Piaggio SI can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Original Piaggio spare part number: 122624
| Manufacturer | swiing® revival parts |
| Material | Spring steel |
| Surface | raw |
| Ø outside | 36 mm |
| Total length | 170 mm |
| Ø wire | 4 mm |
| Ø inside | 28 mm |
| Piaggio OEM number | 122624 |
| Piaggio | Si Bravo / Super Bravo Boxer |
Ratings
Accessories & related products
Oil seal fork NBR 25.7/35/9 B DUO original | Piaggio SI, Bravo, Boxer
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: B DUO - With sheet metal outer casing / two sealing lips. · Ø inside: 25.7 mm · Manufacturer: Piaggio · Material: NBR · Width: 7 mm · Width: 9 mm · Ø outside: 35 mm · Piaggio OEM number: 123196 · Piaggio OEM number: 269888
EUR 9.45
swiing® revival steerer tube nut M27.5x1 open | Piaggio SI Europe, Boxer
Drive: External hexagon · Width across flats: 36 mm · Thread type: MF27.5x1 (fine pitch thread) · Manufacturer: swiing® revival parts · Height: 19 mm · Material: Steel · Surface: chrome-plated · Ø inside: 22.3 mm · Nut type: Hexagon nut · Piaggio OEM number: 184431, 122650
EUR 10.60
EBR fork black | Piaggio SI
Manufacturer: EWC · Material: Steel · Surface: chrome-plated · Surface: varnished · Adjustable: No · Total length: 675 mm · Color: Chrome · Color: black · Spar end distance (center-center): 139 mm · Thread type: MF27.5x1 (fine pitch thread) · Ø outer head tube: 27.9 mm · Ø head tube inside: 22 mm · Ø spars: 28 mm · Thread length: 58 mm · Head tube length: 173 mm · Fork bridge - center wheel axle: 408 mm · Distance brake cam to wheel axle center-center: 62 mm
EUR 245.00
Explore categories from Fork
Moped fans also bought
SITO Plus exhaust Ø 24 mm | Piaggio SI, Grillo
Manufacturer: SITO · Material: Steel · Surface: varnished · Color: black · Ø Silencer: 70 mm · Ø outside: 14 mm · Ø Internal connection: 22.3 mm · Mounting type: Welded lug · Ø Flame tube outside: 25 mm · Exhaust type: Cylindrical · Total length: 720 mm · Flame tube attachment: Plug connection clamped · Number of fixing points: 1 pcs
EUR 95.50
swiing® revival 16" front fender primed | Piaggio SI
Manufacturer: swiing® revival parts · Material: Steel · Surface: primed · Color: black · Folding the ends: open folded · Shape of the mudguard: partly round · Total length over ends: 550 mm · Scope: 705 mm · Wide mudguard profile: 90 mm · Height of mudguard profile: 33 mm · Mounting type: Nuts & bolts · Total height from support surface to top edge: 190 mm · Wheel size: 16 " · Piaggio OEM number: 267651
EUR 41.70
Oil seal fork NBR 25.7/35/9 B DUO original | Piaggio SI, Bravo, Boxer
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: B DUO - With sheet metal outer casing / two sealing lips. · Ø inside: 25.7 mm · Manufacturer: Piaggio · Material: NBR · Width: 7 mm · Width: 9 mm · Ø outside: 35 mm · Piaggio OEM number: 123196 · Piaggio OEM number: 269888
EUR 9.45
Hot 
swiing® ingenious bearing conversion kit cast front wheel | Piaggio Ciao, SI, Bravo, Grillo
Manufacturer: SKF · Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Width: 9 mm · Total length: 53.5 mm · Ø inside: 11.25 mm · Ø inside: 15 mm · Ball bearing closed: Yes · Ø outside: 14.9 mm · Ø outside: 20 mm · Ø outside: 32 mm
EUR 35.30
Collection only possible with online purchase and appointment.
