Complete fork lock set for various Puch forks.
The mounting block for the fork lock is made of iron and is CNC machined from solid material.
The block is welded to the fork.
With original forks, this mounting block is often rusted or worn out.
Our product is the perfect alternative and ensures that the fork lock can be operated cleanly and without jamming.
Scope of delivery as shown in image 1 (block, notched nail and fork lock incl. 2 keys).
Nostalgic product for the highest demands of the quality brand swiing®.
The set includes the following fixed parts:
Manufacturer: swiing® revival parts
Manufacturer: GPO · Material: Steel · Surface: blank · Area of application: Standard · Ø Pin: 2.75 mm · Nominal diameter: 2.5 mm · Ø External head: 5 mm · Total length: 10 mm
Manufacturer: GPO · Material: Brass, Steel, Spring steel · Surface: blank · Total length: 40.8 mm · Length of turned part: 25.6 mm · Locking block length: 15.3 mm · Ø outside: 12 mm · Ø rotating part: 12 mm · Ø Pin: 8 mm · Width: 17 mm · Wide locking block: 4.1 mm
Details
| Manufacturer | swiing® revival parts |
| Material | Steel, Brass |
Suitable for the following models
| Puch |
Moped fans like you also bought:
Clutch 3-jaw aluminum | Puch E50
Thickness: 20.9 mm · Material: Aluminum · Material: Steel · Material addition: Composite materials · Area of application: Original · Area of application: Standard · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm
EUR 60.30
Not so nice 
Chrome luggage rack | Puch Maxi S
Material: Steel · Surface: chrome-plated · Color: Chrome · Wheel size [inch]: 17 " · Total length: 425 mm · Width: 168 mm · Height: 32.5 mm · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs · Ø mounting hole: 8.3 mm · Ø mounting hole: 9 mm · Hole spacing: 29 mm
EUR 24.00
GPO fork lock | Puch
Material: Brass · Material: Spring steel · Material: Steel · Surface: blank · Total length: 40.8 mm · Width: 17 mm · Ø outside: 12 mm · Ø rotating part: 12 mm · Ø Pin: 8 mm · Manufacturer: GPO · Wide locking block: 4.1 mm · Length of turned part: 25.6 mm · Locking block length: 15.3 mm
EUR 12.00
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Thickness: 4.5 mm · Material: Steel · Surface: powder-coated · Color: black · Hole spacing: 36.5 mm · Ø inside: 94 mm · Number of teeth: 45 pcs · Ø mounting hole: 6.7 mm · Cranking (offset): 8 mm · Ø bolt circle: 105.5 mm · Number of fixing points: 6 pcs · Hole spacing 2: 68 mm
EUR 24.00
NTN wheel bearing 12/28/8 rear cast hub Leleu | Puch Maxi
Bearing type: Deep groove ball bearing · Stock number: 6001 · Ø inside: 12 mm · Ø outside: 28 mm · Width: 8 mm · Inner ring width: 12 mm · Manufacturer: NTN · Ball bearing closed: Yes · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CM (special/noise-reduced) · Bearing cage: "-" Sheet steel cage ball-guided · Groove ring: No · Material: Plastic · Material: Steel · Surface: blank · Area of application: Standard
EUR 7.15
Collection only possible with online purchase and appointment.
