Float chamber reproduction suitable for Bing SRE, SRC, SRF and the SRA 1/11/35 carburetor.
This float chamber was installed on Puch Maxi, X30, Velux, Sachs, and Zündapp Belmondo mopeds / mopeds, among others.
Ø outside: 43.5 mm
Total height: 32.5 mm
Nostalgic product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Aluminum |
| Height | 32.5 mm |
| Component group Carburetor | Adjusting screws, float, etc. |
| Carburetor type | SRE, SRC, SRF, SRA (1/11/35) Velux |
| Ø outside | 43.5 mm |
| Width across flats SW | 14 mm |
| Alternative version of the Pony OEM number | A4587 |
| Alternative version of the Sachs OEM number | 0962 056 000 |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Velux) |
| Sachs | 503 - AAL, ABL, 2AL / 2BL, AB, AC |
| Zündapp Belmondo | |
| Kreidler | Flory MF |
Accessories & related products
BING Float cap Bing Original SRE, SRC, SRF, SRA
Manufacturer: BING · Material: Aluminum · Component group Carburetor: Adjusting screws, float, etc. · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Height: 32.5 mm · Ø outside: 43.5 mm · Width across flats SW: 14 mm · Piaggio OEM number: A4587 · Sachs OEM no.: 0962 056 000
EUR 23.20
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Component group Carburetor: Sealing, revising · Material: Sealing paper · Surface: blank · Ø inside: 41 mm · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø outside: 45 mm · Thickness: 1.5 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
EUR 3.45
BING 15 mm Bing original carburetor (1/15/46A)
Manufacturer: BING · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Width: 50 mm · Choke control: Hand choke · Nominal diameter: 15 mm · Height: 95 mm · Total length: 66 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Nozzle size: 82 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m · Area of application: Standard · Area of application: Tuning
EUR 162.90
GPO gasket set carburetor Bing SRE
Ø inside: 7.8 mm · Ø inside: 41 mm · Ø outside: 12.2 mm · Ø outside: 45 mm · Manufacturer: GPO · Camouflaged: No · Material: Sealing paper · Component group Carburetor: Sealing, revising · Carburetor type: SRE · Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm
EUR 6.00
BING Carburetor cover Bing SRE (original)
Manufacturer: BING · Material: Aluminum · Component group Carburetor: Adjusting screws, float, etc. · Thread type: MF6x0.75 (fine pitch thread) · Carburetor type: SRE · Pony OEM number: A4588 · Sachs OEM no.: 0962 058 005 · Zündapp OEM number: 265-04.900
EUR 19.50
BING revision set float Original Bing SRE, SRC, SRF, SRA
Manufacturer: BING · Component group Carburetor: Sealing, revising · Color: white · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Height: 18 mm · Ø outside: 36.5 mm · Pony OEM number: A5634 · Sachs OEM no.: 0281 125 002
EUR 36.70
Moped fans also bought
swiing® revival Bing float needle (with penetration) SRE, SRC, SRF, SRA, 85, 18
Total length: 12 mm · Manufacturer: swiing® revival parts · Component group Carburetor: Adjusting screws, float, etc. · Material: Aluminum · Material: Rubber · Surface: blank · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø outside: 2.6 mm · Ø outside: 4 mm · Carburetor type: 18 Catalyst · Carburetor type: 85 · Color: black · Color: silver · Width: 3.3 mm · Alternative version of the Pony OEM number: A4595A · Alternative version of the Sachs OEM number: Bing 47-032
EUR 8.45
Magura cable clamp Ø 8 x 15 mm
Ø Cable bushing: 2.3 mm · Manufacturer: Magura · Thread length: 7 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Drive: External hexagon · Drive: Slot · Ø Bundle: 6 mm · Screw head: Hexagon · Ø outside: 8 mm · Total length: 15 mm · Area of application: Standard · Width across flats SW: 7 mm
EUR 3.05
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Component group Carburetor: Sealing, revising · Material: Sealing paper · Surface: blank · Ø inside: 41 mm · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø outside: 45 mm · Thickness: 1.5 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
EUR 3.45
GPO gasket set carburetor Bing SRE
Ø inside: 7.8 mm · Ø inside: 41 mm · Ø outside: 12.2 mm · Ø outside: 45 mm · Manufacturer: GPO · Camouflaged: No · Material: Sealing paper · Component group Carburetor: Sealing, revising · Carburetor type: SRE · Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm
EUR 6.00
swiing® revival float axle Bing SRE, SRF, SRA, SRC
Manufacturer: swiing® revival parts · Material: Steel · Component group Carburetor: Adjusting screws, float, etc. · Surface: galvanized (blue) · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø outside: 1.5 mm · Total length: 18 mm · Alternative version of the Pony OEM number: A4597 · Alternative version of the Sachs OEM number: 0962 078 000
EUR 3.55
swiing® revival float replica Bing SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Component group Carburetor: Adjusting screws, float, etc. · Color: brown · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø outside: 36.5 mm · Height: 18 mm
EUR 10.90
swiing® revival 90° carburetor pipe bend M6x0.75
Manufacturer: swiing® revival parts · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Ø outside: 6 mm · Total length: 40 mm · Total length: 49 mm · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 90 ° · Height: 32 mm
EUR 8.45
Collection only possible with online purchase and appointment.
