Hardened deco valve made of special steel, suitable for the cylinder head on your Piaggio Ciao, Si, Bravo and Boxer moped / moped.
Note: For better sealing, the valve pin can be ground into the cylinder head using a slotted bit and grinding paste.
The decorative pin is not suitable for newer Malossi cylinder heads.
You can find more decompressor parts in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Original Piaggio spare part number: 113245
Details
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | gas nitrided |
| Total length | 50.35 mm |
| Piaggio OEM number | 113245 |
Suitable for the following models
| Piaggio | Ciao - P, SC, PX, C24 Si Bravo / Super Bravo Boxer Grillo Gilera CBA Gilera Citta |
Accessories & related products
swiing® revival decompressor set | Piaggio Ciao, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Spring steel · Material: Steel · Surface: galvanized (blue) · Surface: gas nitrided · Area of application: Original · Area of application: Standard · Piaggio OEM number: 012768 · Piaggio OEM number: 113242 · Piaggio OEM number: 113244 · Piaggio OEM number: 113245 · Piaggio OEM number: 113246 · Piaggio OEM number: 113247
EUR 24.00
Moped fans like you also bought:
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Drive: Slot · Ø Cable bushing: 1.6 mm · Total length: 6 mm · Screw head: Lens head · Thread length: 4 mm · Ø outside: 5 mm · Thread type: M4x0.7 (standard thread)
EUR 2.40
Polini air filter | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Polini · Material: Plastic · Color: black · Filter type: Foam · Total length: 29 mm · Width: 98 mm · Mounting type: Plug connection clamped · Height: 94.7 mm · Ø Internal connection: 50.6 mm · Ø outside: 53 mm · Camouflaged: No · Area of application: Tuning
EUR 18.00
Reflector & glass white | Piaggio Ciao PX, C24, Boss
Manufacturer: Made in Italy · Test mark: none · Material: Plastic · Color: white · Bulb holder: P26s · Bulb holder: Soffit pear · Width: 119 mm · Height: 85 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Hole spacing: 104 mm
EUR 30.10
Polini Racing 43 mm cylinder kit incl. head 10 mm KoBo | Piaggio SI, Bravo, Grillo
Nominal diameter: 43 mm · Manufacturer: Polini · Material: Gray cast iron · Surface: sandblasted · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.7 mm · Ø Outlet outside: 22.4 mm · Ø outlet inside: 18.1 mm · Ø piston pin (B): 10 mm · Outlet type: clamped · Number of fixing points: 3 pcs · Hole pattern [mm]: 55 x 34 · Decompressor: Yes · Camouflaged: No · Area of application: Tuning
EUR 289.70
Dell'Orto 13/13 SHA carburetor | Piaggio SI, Boss, Grillo
Nominal diameter: 13 mm · Manufacturer: Dell'Orto · Material: Aluminum · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: SHA (Piaggio) · Choke control: Hand choke · Total length: 55 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 5.2 mm · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 18 mm · Nozzle size: 66 · Ø Inside entrance: 13 mm · Width: 60 mm · Mounting type: Plug connection clamped · Ø Output inside: 13 mm · Height: 118 mm · Ø Air filter connection: 50.8 mm · Ø Internal connection: 16 mm · Camouflaged: No · Area of application: Tuning
EUR 84.40
Collection only possible with online purchase and appointment.
