Foot gasket for the original cylinder suitable for Puch X30 Velux mopeds.
This cylinder gasket (cylinder flange gasket) is a perfect fit for original cylinders and of the highest quality.
Thickness of the foot gasket: 0.50 mm
Material: oiled paper
Note: For cylinders with a neck diameter of 43 mm (e.g. 40 or 41 mm cylinder kit in the accessories).e.g. 40 or 41 mm cylinder kit in the accessories), we recommend that you use the gasket with item number 20531.
Nostalgic product for the highest demands of the quality brand swiing®.
Original Puch spare part number: 320.2.10.013.1
| Manufacturer | swiing® revival parts |
| Material | Oiled paper |
| Place of use | Cylinder base |
| Ø cylinder | 38 mm |
| Thickness | 0.5 mm |
| Puch | ZA50 (fan-cooled) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Ratings
Accessories & related products
GPO gasket set 38 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Ø cylinder: 38 mm · Ø outlet inside: 22 mm · Number of components: 4 pcs · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Standard
EUR 10.60
GPO gasket set 40 - 41 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Ø cylinder: 40 mm · Ø cylinder: 41 mm · Ø outlet inside: 22 mm · Number of components: 4 pcs · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Tuning
EUR 10.60
GPO 41 mm cylinder kit fan-cooled 12 mm KoBo | Puch X30 Velux, NG-2AH
Manufacturer: GPO · Manufacturer: swiing® revival parts · Camouflaged: No · Crankshaft stroke: 43 mm · Displacement: 60 ccm · Nominal diameter: 41 mm · Material: Gray cast iron · Hole spacing inlet: 32 mm · Surface: sandblasted · Ø cylinder neck: 43.2 mm · Ø outlet inside: 19.4 mm · Ø Inlet inside: 14.6 mm · Ø piston pin (B): 12 mm · Hole spacing outlet: 42 mm · Thread inlet: M6x1 (standard thread) · Area of application: Tuning · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Outlet type: straight · Thread outlet: M6x1 (standard thread)
EUR 131.40
GPO tuning set 41 mm | Puch X30 Velux
Manufacturer: GPO · Displacement: 60 ccm · Nominal diameter: 41 mm · Crankshaft stroke: 43 mm · Camouflaged: No · Hole pattern [mm]: 44 x 44 · Hole spacing inlet: 32 mm · Decompressor: No · Ø piston pin (B): 10 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Area of application: Tuning
EUR 520.10
38 mm cylinder kit 12 mm KoBo NOS | Puch X30 Velux
Manufacturer: Puch · Material: Gray cast iron · Surface: raw · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 38 mm · Ø cylinder neck: 44.9 mm · Ø outlet inside: 19.4 mm · Area of application: Original · Ø Inlet inside: 8.2 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Hole pattern [mm]: 44 x 44 · Outlet type: straight · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Decompressor: Yes · Camouflaged: No
EUR 298.80
Hot 
GPO 40 mm cylinder kit 12 mm KoBo | Puch X30 Velux, NG-2AH
Nominal diameter: 40 mm · Manufacturer: GPO · Material: Gray cast iron · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 43 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Camouflaged: No · Area of application: Tuning
EUR 143.40
Explore categories from Seals & gaskets
Moped fans also bought
Oil seal NBR 17/28/7 AS Pinion shaft | Puch Z50
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Ø inside: 17 mm · Manufacturer: Puch · Material: NBR · Place of use: Pinion shaft · Surface: rubberized · Width: 7 mm · Ø outside: 28 mm · Area of application: Standard
EUR 5.85
Oil seal NBR 17/35/7 AS crankshaft | Puch X30
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Ø inside: 17 mm · Manufacturer: Puch · Place of use: Crankshaft · Material: NBR · Surface: rubberized · Width: 7 mm · Ø outside: 35 mm
EUR 9.45
Collection only possible with online purchase and appointment.
