Special Venturi pipe made of red anodized aluminium for your moped / moped with Sachs 50/2, 50/3 & 50/4 engine and Ø 32 mm flame tube.
The Venturi pipe is specially developed for the swiing 38 mm and 41 mm aluminium cylinders and helps the exhaust gas to escape more slowly into the exhaust to develop a greater suction. With the insert you achieve more power at low engine speeds.
For installation, the threaded ring may have to be changed from M35 to M40 in advance so that a 32 mm manifold can be installed. In addition, the special, extended exhaust nut should be used so that the flame tube can be screwed on correctly. Depending on the temperature, the weld seam on the inside may need to be ground down slightly.
Ø outer: 29 mm
Ø flange: 38 mm
Ø inlet: 22.5
Ø outlet: 26 mm
Length: 40 mm
Material: aluminium, anodized
You can find the matching flame tube, the exhaust nut, the threaded ring and a suitable exhaust in the accessories section.
Exceptional product for the highest demands of the swiing® quality brand.
| Manufacturer | swiing® ingenious parts |
| Material | Aluminum |
| Surface | anodized |
| Ø outside | 29 mm, 38 mm |
| Color | red |
| Ø inside | 22.5 mm, 26 mm |
| Total length | 40 mm |
| Sachs | 50/2 50/3 50/4 |
Accessories & related products
Hot 
swiing® ingenious cigar Ø 32 / 70 mm chrome (reso exhaust)
Ø outside: 70 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø Silencer: 70 mm · Mounting type: Screwed clamp · Ø Internal connection: 32 mm · Exhaust type: Cigar · Total length: 730 mm
EUR 122.40
swiing® ingenious hook wrench M40 exhaust nut | Sachs 50/2
Height: 5 mm · Width: 67 mm · Ø inside: 33 mm · Ø outside: 46 mm · Manufacturer: swiing® ingenious parts · Material: Rubber · Material: Steel · Area of application: Workshop accessories · Surface: galvanized (blue) · Number of components: 1 pcs · Weight: 300 g · Total length: 280 mm
EUR 30.50
Hot
swiing® ingenious flute Ø 32 / 70 mm chrome (reso exhaust)
Ø outside: 35 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø Silencer: 70 mm · Mounting type: Screwed clamp · Ø Internal connection: 32 mm · Exhaust type: Flute · Total length: 785 mm · Flame tube attachment: Plug connection clamped
EUR 134.70
Hot
swiing flute Ø 32 / 70 mm black (reso exhaust)
Manufacturer: swiing · Material: Steel · Surface: varnished · Color: black · Ø Silencer: 70 mm · Mounting type: Screwed clamp · Ø Internal connection: 32 mm · Exhaust type: Flute · Total length: 780 mm · Flame tube attachment: Plug connection clamped
EUR 134.70
Moped fans also bought
Nut M12x1 x 10 SW19 Wheel nut Inox
Height: 10 mm · Thread type: MF12x1 (fine pitch thread) · Material: Chrome steel (known as Nirosta®) · Area of application: Standard · Surface: blank · Nut type: Hexagon nut 1D · Width across flats SW: 19 mm · Drive: External hexagon · Strength class: A2-70
EUR 4.80
Not so nice 
Exhaust clamp 32 mm with rubber
Width: 40 mm · Ø inside: 35 mm · Material: Rubber · Material: Silicone · Surface: galvanized (blue) · Color: silver · Nominal diameter: 32 mm · Thickness: 3.5 mm · Number of fixing points: 1 pcs · Clamping diameter: 32 - 35 mm · Ø mounting hole: 6.4 mm
EUR 17.00
Collection only possible with online purchase and appointment.
