Bearing and shaft seal set for Puch mopeds / mopeds with 1-speed E50 engines (old model).
This bearing set can be installed in Puch Maxi S, Puch Maxi N and Puch Supermaxi LG1 cat engines, among others.
All ball bearings are from the quality brand SKF with increased bearing clearance C3.
The shaft seals (colloquially known as oil seals) are made of fluorine rubber and are resistant up to a temperature of 200°C.
Manufactured NBR shaft seals are temperature-resistant up to 100 °C.
FPM or FKM shaft seals (commonly known as Viton) are particularly suitable for racing, as they are designed for higher speeds and can therefore withstand higher temperatures.
Installation positions of the oil seals:
17/40/7 A (one sealing lip, without dust lip): Crankshaft on the ignition side
22/40/7 DUO (two sealing lips): Crankshaft Clutch side
17/40/7 DUO (two sealing lips): Gear pinion shaft
Note: Suitable for crankshafts which have an enlarged oil seal seat on the clutch side and a bearing with a 12 mm inner ring.
Exclusive product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Area of application | Standard |
| Number of components | 7 pcs |
| Puch | E50 |
Accessories & related products
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Decompressor: Yes · Hole pattern [mm]: 44 x 44
EUR 12.20
swiing® revival Screw Set, Engine, Galvanized, Small | Puch E50
Material: Steel · Surface: galvanized (blue) · Drive: Cross recess · Drive: Hexagon socket · Manufacturer: swiing® revival parts · Screw head: Countersunk head · Screw head: Cylinder head · Screw head: Lens head · Puch OEM number: 900.1216 · Puch OEM number: 901.1308
EUR 12.20
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Material: Silicone · Color: gray · Contents: 70 ml · Area of application: Chemistry · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Gap dimension (max.): 2 mm · Temperature resistance (min.): -60 - 315 °C
EUR 24.50
EUR 350.00/l
swiing® revival ball bearing puller L17 / BO15 / E15 / E20 / 6203 / 6202
Number of components: 3 pcs · Manufacturer: swiing® revival parts · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: E20 · Peel-off tray: L17 · Peel-off tray: 6202 · Peel-off tray: 6203 · Material: Steel · Surface: galvanized (blue) · Surface: gas nitrided · Area of application: Special tool
EUR 49.10
Explore categories from Engine block
Moped fans also bought
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Decompressor: Yes · Hole pattern [mm]: 44 x 44
EUR 12.20
swiing® revival nut / spring washer clutch E50 | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.8D · Height: 8 mm · Drive: External hexagon · Nominal diameter (thread): 10 mm · Thread type: MF10x1 (fine pitch thread) · Width across flats: 17 mm
EUR 4.80
swiing® revival Screw Set, Engine, Galvanized, Small | Puch E50
Material: Steel · Surface: galvanized (blue) · Drive: Cross recess · Drive: Hexagon socket · Manufacturer: swiing® revival parts · Screw head: Countersunk head · Screw head: Cylinder head · Screw head: Lens head · Puch OEM number: 900.1216 · Puch OEM number: 901.1308
EUR 12.20
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Ø inside: 106 mm · Ø outside: 116 mm · Thickness: 0.5 mm · Number of components: 1 pcs · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 3.55
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Ø inside: 106 mm · Ø outside: 116 mm · Number of components: 1 pcs · Thickness: 1 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.80
swiing® ingenious crankshaft "High End" | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Cheek type: Full cheeks · Crankshaft stroke: 43 mm · Weight: 968 g · Thread type: MF10x1 (fine pitch thread) · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø piston pin (B): 12 mm · Area of application: High End · Area of application: Racing · Area of application: Tuning · Ø Connecting rod eye: 15 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Thread length: 11 mm · Thread length: 15 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Number of gears: 1 pcs
EUR 178.30
Not in stock
GPO Special Cylinder Stud Bolt Set M6x106, Galvanized | Puch
Surface: galvanized (blue) · Drive: External hexagon · Manufacturer: GPO · Material: Steel · Diameter: 7 mm · Total length: 106 mm · Nominal diameter (thread): 6 mm · Thread type: M6x1 (standard thread) · Thread length: 15 mm · Thread length: 19 mm · Strength class: 10 · Strength class: 10.9 · Width across flats: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 24.50
Working late? Evening hours on Thursday until 20:00
