Engine mount 2.0 for Sachs 50/2, 50/3 and 50/4 engines. Revised version for a better fit of the engine.
The revised version can only be used in conjunction with the engine mount 2.0. Not suitable for the conventional engine mounts.
No more makeshift placement of wooden blocks during engine overhauls and tilting of the engine when tightening the screws.
We offer you an exclusive engine holder with which you can carry out revisions, tuning or other work on the engine conveniently and efficiently.
The mounting bracket can be rotated 360°. The holder is only fixed to one half of the housing. This means that gearbox revisions can be carried out in full.
Figure 1 shows the "Expert 2.0" engine stand with the engine mount. The scope of delivery corresponds to picture 3.
Exceptional product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Area of application | Motor bracket |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) |
Ratings
Accessories & related products
Hot 
swiing® ingenious "Expert" motor stand
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: varnished · Width: 245 mm · Total length: 370 mm · Color: red · Color: white · Ø Receptacle: 25 mm · Ø Receptacle: 35 mm · Material thickness: 3.5 mm · Height: 340 mm · Hole spacing: 21.5 mm · Area of application: Motor bracket
EUR 92.10
Moped fans also bought
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Total length: 55 mm · Total length: 75 mm · Strength class: 8.8 · Number of components: 1 pcs · Area of application: (Dis)assembly tool
EUR 12.20
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Width across flats trigger: 8 mm · Width across flats trigger: 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Surface: galvanized (blue) · Diameter: 24 mm · Diameter: 40.3 mm · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Total length: 120 mm · Number of components: 1 pcs · Area of application: (Dis)assembly tool
EUR 54.00
GPO clutch trigger M27x1.25, M20x1 | Sachs 503, 50/2, 50/3, 50/4
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Material: Steel · Surface: blackened · Total length: 57 mm · Thread type: MF20x1 (fine pitch thread) · Thread type: MF27x1.25 (fine pitch thread) · Area of application: (Dis)assembly tool · Strength class: 8.8
EUR 24.50
swiing® revival clamping device clutch | Sachs 503, 50/2, 50/3, 50/4
Material: Aluminum · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Manufacturer: swiing® revival parts · Number of components: 4 pcs · Thread type: M6x1 (standard thread) · Height: 16 mm · Ø outside: 75 mm · Ø inside: 64 mm · Thread length: 40 mm · Area of application: Special tool · Sachs OEM no.: 0276 057 000
EUR 36.80
Not in stock
swiing® revival puller clutch basket manual | Sachs
Material: Steel · Surface: blackened · Surface: galvanized (blue) · Manufacturer: swiing® revival parts · Number of components: 4 pcs · Thread type: MF12x1.25 (fine pitch thread) · Thickness: 25 mm · Total length: 106 mm · Width across flats Screw: 19 mm · Area of application: (Dis)assembly tool
EUR 40.40
GPO piston pin extractor Ø 10, 12, 14 mm
Surface: burnished · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Manufacturer: GPO · Total length: 130 mm · Material: Steel · Number of components: 7 pcs · Width across flats: 10 mm · Width across flats: 17 mm · Area of application: (Dis)assembly tool
EUR 24.50
swiing® ingenious flywheel holder 3 pins (Bosch / Ducati flywheels)
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Surface: rubberized · Diameter: 19 mm · Ø inside: 27 mm · Ø outside: 93 mm · Height: 80 mm · Total length: 290 mm · Thickness: 5 mm · Ø Pin: 8 mm · Number of components: 1 pcs · Area of application: Special tool
EUR 58.90
Hot
swiing® ingenious "Expert" motor stand
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: varnished · Width: 245 mm · Total length: 370 mm · Color: red · Color: white · Ø Receptacle: 25 mm · Ø Receptacle: 35 mm · Material thickness: 3.5 mm · Height: 340 mm · Hole spacing: 21.5 mm · Area of application: Motor bracket
EUR 92.10
Collection only possible with online purchase and appointment.
