Cable starter guard made of stainless steel (chrome steel) for all swiing cable starters for clockwise rotating Puch E50 engines on your Puch Maxi S / N and Puch Supermaxi LG1 moped.
All mounting material is included in the scope of delivery.
The mounted protective ring is shown in Figure 2 for illustration purposes.
Other helpful accessories for the cable starter conversion such as Loctite, racing gloves, replacement cord, rubber mallet etc. can be found under accessories.
Exclusive product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Material | Steel, Chrome steel (colloquially known as stainless steel) |
| Surface | galvanized (blue) |
| Number of fixing points | 3 pcs |
| Puch |
| Piaggio |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Temperature resistance (min.): -75 - 200 °C · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 27.10
EUR 2’710.00/l
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Chain pitch: 1/2" x 3/16" · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø bore: 4 mm · Ø Pin: 3.94 mm
EUR 15.50
swiing® revival upright spring blue galvanized | Puch
Spring design: Tension spring · Manufacturer: swiing® revival parts · Ø outside: 14 mm · Material: Spring steel · Surface: galvanized (blue) · Total length: 122 mm · Ø wire: 2.5 mm · Ø inside: 9 mm · Length spring hook: 19 mm · Length spring hook: 53 mm
EUR 3.35
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Nipple length: 5 mm · Area of application: Standard
EUR 2.95
swiing® ingenious pull-wire starter PVL ignition | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Ignition system: PVL · Total length: 170 mm · Ø outside: 130 mm · Color: Chrome · Width: 150 mm · Number of fixing points: 2 pcs · Height: 80 mm · Hole spacing: 138 mm
EUR 185.70
swiing® revival stud bolt set M6 x 106 | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Diameter: 5.9 mm · Width across flats: 10 mm · Total length: 106 mm · Drive: External hexagon · Thread length: 13 mm · Thread length: 18.5 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 9.15
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Thickness: 1 mm · Manufacturer: swiing® revival parts · Ø outside: 116 mm · Material: Sealing paper · Color: sand-colored · Ø inside: 106 mm · Number of components: 1 pcs · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.85
Collection only possible with online purchase and appointment.
