Special holding tool that simplifies work on the clutch or the ignition on your moped, moped and small motorcycle.
The matching bolt is pushed into the upper connecting rod eye and the plastic plate is used to cover the opening to the engine housing. When working on the flywheel, the bolt will then rest cleanly on the plate and the nut can be loosened and tightened without any problems.
The second picture serves to illustrate this.
With this simple tool, you save yourself the purchase of various different counterholders and have the right assembly tool to hand for all engines.
Alternative counterholders can be found under accessories.
Exceptional product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Material | Plastic |
| Diameter | 10 mm, 12 mm, 15 mm |
| Number of components | 4 pcs |
Accessories & related products
swiing® ingenious flywheel holder 3 pins (Bosch / Ducati flywheels)
Manufacturer: swiing® ingenious parts · Area of application: Special tool · Material: Steel · Surface: galvanized (blue) · Surface: rubberized · Number of components: 1 pcs · Total length: 290 mm · Height: 80 mm · Thickness: 5 mm · Diameter: 19 mm · Ø inside: 27 mm · Ø outside: 93 mm · Ø Pin: 8 mm
EUR 72.50
Not in stock
Explore categories from Tools
Moped fans also bought
Nos
Hot 
BERU Spark Plug Connector, 1 kΩ, Noise-Suppressed, NOS
Manufacturer: BERU · Material: Sheet metal (steel) · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Color: silver · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 12.20
Magura cable clamp Ø 8 x 15 mm
Ø Cable bushing: 2.3 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Area of application: Standard · Thread type: M6x1 (standard thread) · Total length: 15 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Ø Bundle: 6 mm · Ø outside: 8 mm · Thread length: 7 mm · Width across flats: 7 mm
EUR 3.05
Airsal 45 mm cylinder kit 70 ccm camouflaged | Puch
Manufacturer: Airsal · Material: Aluminum · Camouflaged: Yes · Surface: sandblasted · Area of application: Tuning · Displacement: 70 ccm · Nominal diameter: 45 mm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Ø cylinder neck: 48 mm · Inlet window: 23.5 / 20 x 15 mm · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 25 mm · Hole spacing outlet: 42 mm · Outlet type: straight · Hole spacing inlet: 38 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
EUR 122.90
Hot
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1600 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
EUR 12.20
Cable set E50 engine automatic black | Puch Maxi S / N
Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Outer shell length: 6000 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 1600 mm · Total length: 2200 mm · Color: black
EUR 24.00
swiing® revival rear brake anchor plate | Puch Maxi N
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø outside: 92 mm · Ø External brake pads: 80 mm · Ø axle: 12 mm · Ø shaft: 10 mm · Ø bore: 12.2 mm · Ø screw holder: 6.5 mm · Wide cam holder: 12 mm · Total length: 135 mm · Brake lever length (lever length): 68 mm · Cranking (offset): 10 mm
EUR 92.20
Working late? Evening hours on Thursday until 20:00
