Hot 
Special aluminum flange, nickel-plated, to mount a larger carburetor on Pony / Cilo Beta 521 mopeds / mopeds.
This ring can be glued to conventional SHA 9 - 13 mm carburetors from Dell'Orto.
Dimension of the ring:
Ø inside: 51 mm
Ø outside: 59 mm
Length: 14 mm
Attention: To be able to mount the carburetor with the original air filter box, the flange must be glued on with Loctite 638 and an air filter mat must be inserted in the air filter box. It is no longer possible to fit the air filter screen!
You can find the attachment parts under accessories.
Exclusive product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® ingenious parts |
| Material | Aluminum |
| Surface | nickel-plated |
| Ø outside | 59 mm |
| Ø inside | 51 mm |
| Total length | 14 mm |
| Mounting type | glue |
Suitable for the following models
| Universal | |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta 521 (engine) |
Accessories & related products
swiing nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
Manufacturer: swiing · Material: Brass · Component group Carburetor: Spraying · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Total length: 8 mm · Quantity: 10 pcs · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70
EUR 22.30
EUR 25.20
Loctite 638 High-strength adhesive 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: green · Contents [ml]: 10 ml · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Danger · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Adhesion: high-strength · Type of application: 1K · Gap dimension (max.): 0.25 mm · Alignment time: 300 sec · Temperature resistance (min.): -75 - 150 °C · Breakaway torque (according to material): 23 N/m · Breakaway torque (according to material): 25 N/m · Breakaway torque (according to material): 57 N/m
EUR 26.40
EUR 2’640.00/l
Dell'Orto 12/10 SHA carburetor (replacement) | Pony Beta 521
Manufacturer: Dell'Orto · Component group Carburetor: Carburetor complete · Carburetor type: SHA (Piaggio) · Nominal diameter: 12 mm · Ø Internal connection: 16 mm · Ø without reducing sleeve: 19 mm · Ø Inside entrance: 10 mm · Ø Output inside: 12 mm · Ø Air filter connection: 50.6 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 37 · Mounting type: Plug connection clamped · Total length: 45 mm · Width: 60 mm · Height: 96 mm · Area of application: Tuning
EUR 78.40
Moped fans like you also bought:
swiing nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
Manufacturer: swiing · Material: Brass · Component group Carburetor: Spraying · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Total length: 8 mm · Quantity: 10 pcs · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70
EUR 22.30
EUR 25.20
NGK B8ES spark plug long thread
Manufacturer: NGK · Candle designation: B8ES · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Candle thread type: long · Spark plug socket: M4 · Thread type: MF14x1.25 (fine pitch thread) · Spark plug socket: SAE · Suppressed: No · Width across flats SW: 21 mm
EUR 7.85
Dell'Orto 13/13 SHA carburetor hand choke | Piaggio Ciao PX, C24
Manufacturer: Dell'Orto · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Color: black · Carburetor type: SHA (Piaggio) · Nominal diameter: 13 mm · Ø Internal connection: 16 mm · Ø without reducing sleeve: 18 mm · Ø Inside entrance: 13 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm · Ø fuel hose connection: 5.2 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 66 · Mounting type: Plug connection clamped · Total length: 46 mm · Width: 60 mm · Height: 96 mm · Area of application: Tuning
EUR 72.30
Not in stock
GPO mushroom air filter grille Dell'Orto SHA carburetor
Manufacturer: GPO · Camouflaged: No · Color: Chrome · Color: black · Material: Metal · Material: Rubber · Filter type: Grille · Total length: 46.4 mm · Length rubber part: 17 mm · Length of filter section: 29.4 mm · Ø Internal connection: 60 mm · Ø outside: 87 mm · Mounting type: Bride · Mounting type: Plug connection clamped · Area of application: Tuning
EUR 20.40
Airsal 43.5 mm cylinder kit Beta | Cilo Cross 521 / 512, Pony Cross 521, Pony GTX 521
Manufacturer: Airsal · Material: Aluminum · Area of application: Tuning · Surface: sandblasted · Displacement: 57 ccm · Crankshaft stroke: 39 mm · Nominal diameter: 43.5 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 18 mm · Ø Outlet outside: 21 mm · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Hole spacing outlet: 38 mm · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 48 · Camouflaged: No
EUR 241.40
SIS Tuning Exhaust | Pony / Cilo Beta 521
Manufacturer: Made in Portugal · Ø outside: 60 mm · Material: Steel · Color: Chrome · Color: black · Surface: varnished · Total length: 780 mm · Ø Silencer: 60 mm · Flame tube attachment: Flange · Ø Internal connection: 19 mm · Mounting type: Welded lug · Number of fixing points: 2 pcs · Ø Flame tube outside: 22 mm · Exhaust type: Cigar
EUR 156.90
Dell'Orto 12/10 SHA carburetor hand choke
Manufacturer: Dell'Orto · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Color: black · Carburetor type: SHA (Piaggio) · Nominal diameter: 10 mm · Nominal diameter: 12 mm · Ø Internal connection: 16 mm · Ø without reducing sleeve: 19 mm · Ø Inside entrance: 10 mm · Ø Output inside: 12 mm · Ø Air filter connection: 50.6 mm · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 37 · Mounting type: Plug connection clamped · Total length: 55 mm · Width: 60 mm · Height: 111 mm · Area of application: Original · Area of application: Tuning
EUR 78.40
SITO "Diablo" racing exhaust | Pony / Cilo Beta 521
Manufacturer: SITO · Material: Steel · Surface: varnished · Total length: 780 mm · Color: black · Ø Silencer: 57 mm · Ø Internal connection: 20 mm · Ø Flame tube outside: 24 mm · Exhaust type: Cylindrical · Mounting type: Welded lug · Number of fixing points: 1 pcs · Flame tube attachment: Flange
EUR 144.80
Dell'Orto air filter box SHA (air holes on top)
Manufacturer: Dell'Orto · Material: Plastic · Color: black · Ø inside: 60 mm · Total length: 115 mm · Height: 50 mm · Width: 60 mm · Ø bore: 12 mm · Mounting type: Plug connection clamped · Area of application: Standard · Pony OEM number: A8192
EUR 20.40
Airsal tuning set 43.5 mm | Beta 521 engine
Nominal diameter: 60 mm · Manufacturer: Airsal · Manufacturer: Dell'Orto · Manufacturer: NGK · Manufacturer: SITO · Manufacturer: swiing · Displacement: 60 ccm · Ø piston pin (B): 12 mm · Outlet type: straight · Camouflaged: No · Area of application: Tuning
EUR 501.00
Not in stock
Collection only possible with online purchase and appointment.
