Montageanleitung
Set
Hot 
High-quality 45mm tuning cylinder suitable for your Puch Maxi S / N, Puch X30 Sport NS/NL, Puch X30 Sport NG-2A, and Puch Supermaxi moped / moped.
In terms of appearance, this 70cc racing cylinder is indistinguishable from the original. The cast-in "CH12" and original-sized cooling fins ensure optimum protection from the racing authorities ;).
In the selection field, you will find the matching 45 mm cylinder head to complete this masterful racing kit.
Note: We recommend running this cylinder with a larger exhaust and carburetor to get the full power out of the racing cylinder.
In addition to the piston, the clips, bolts and piston rings as well as all the necessary gaskets are included in the scope of delivery for this cylinder set. Detailed instructions for correct installation and running-in are also included.
The individual parts of this cylinder kit as well as stud bolts and other engine parts can be found under accessories.
Exceptional product for the highest demands of the quality brand swiing®.
The set includes the following fixed parts:
Hole pattern [mm]: 44 x 44 · Inlet window: 23.6/21.2 x 14.7 · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 45 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Camouflaged: Yes · Area of application: Tuning
Details
| Manufacturer | swiing® ingenious parts |
| Material | Aluminum |
| Surface | sandblasted |
| Displacement | 70 ccm |
| Area of application | Tuning |
| Nominal diameter | 45 mm |
| Crankshaft stroke | 43 mm |
| Ø cylinder neck | 48 mm |
| Ø outlet inside | 25 mm |
| Number of fixing points | 4 pcs |
| Inlet window | 23.6/21.2 x 14.7 |
| Thread inlet | M6x1 (standard thread) |
| Hole spacing inlet | 38 mm |
| Ø piston pin (B) | 12 mm |
| Hole spacing outlet | 42 mm |
| Outlet type | straight |
| Thread outlet | M6x1 (standard thread) |
| Hole pattern [mm] | 44 x 44 |
| Decompressor | No |
| Camouflaged | Yes |
Suitable for the following models
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
swiing® ingenious piston 45 mm | Puch
Manufacturer: swiing® ingenious parts · Nominal diameter: 45 mm · Thick piston ring: 1.9 mm · Ø outside piston (A): 44.95 mm · Compression height (C): 22.4 mm · Curvature (D): 4.6 mm · Total piston height (E): 50.5 mm · Number of piston rings (F): 1 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Ø piston pin (B): 12 mm · Piston weight: 91 g
EUR 55.10
swiing® ingenious gasket set 44 - 45 mm cylinder | Puch
Number of components: 4 pcs · Manufacturer: swiing® ingenious parts · Area of application: Tuning · Ø cylinder: 44 mm · Ø cylinder: 45 mm · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
EUR 12.20
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing cage: Silver cage · Manufacturer: swiing® ingenious parts · Bearing type: Needle roller and cage assembly · Width: 14.2 mm · Ø outside: 15 mm · Ø inside: 12 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony OEM number: A4222 · Alternative version of the Sachs OEM number: 0232 157 001 · Tomos OEM number: 035548
EUR 14.60
Moped fans like you also bought:
GPO 45 mm cylinder head tuning Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Area of application: Tuning · Ø cylinder: 45 mm · Width: 125 mm · Height: 55 mm · Total length: 135 mm · Number of fixing points: 4 pcs · Candle thread: short · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes
EUR 40.40
Hot
swiing 15 mm carburetor tuning camouflaged | Puch
Manufacturer: swiing · Component group Carburetor: Carburetor complete · Material: Aluminum · Area of application: Tuning · Nominal diameter: 15 mm · Carburetor type: SRE · Width: 50 mm · Choke control: Hand choke · Height: 95 mm · Total length: 66 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
EUR 98.10
Hot
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Width: 47 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Area of application: Tuning · Carburetor type: SRE · Nominal diameter: 17 mm · Nozzle thread: M3.5x0.6 (standard thread) · Total length: 65 mm · Nozzle size: 74 · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Mounting type: Plug connection clamped · Ø Output inside: 17.1 mm · Ø Air filter connection: 27.5 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Height: 89 mm · Height: 109 mm · Nozzle block: 2.2 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 147.20
Hot
swiing® ingenious intake manifold 17 mm SRF camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Ø inside: 17 mm · Total length: 38 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of fixing points: 2 pcs · Ø External connection: 23 mm · Height flange center hole: 42 mm · Total height: 53.5 mm · Mounting type: Stud bolts & nuts · Hole spacing inlet: 38 mm
EUR 55.10
Collection only possible with online purchase and appointment.
