Complete seal kit for the 41 mm swiing® racing cylinder for Deutsche Sachs 50/2, 50/3, and 50/4 engines.
The gasket set includes the following gaskets:
- 16 mm intake gasket
- 41 mm cylinder head gasket
-
Cylinder base gasket - Sealing ring Ø33.5/26 x 4
You can find the corresponding cylinders and other mounting parts in the accessories section.
A sophisticated product from the swiing® quality brand, designed to meet the highest standards.
| Manufacturer | swiing® ingenious parts |
| Ø cylinder | 41 mm |
| Area of application | Tuning |
| Number of components | 3 pcs |
| Hole spacing inlet | 31 mm |
| Hole pattern [mm] | 51 x 40 mm / 37 x 37 mm |
| Sachs | 502 (Saxonette) - AL , AML 50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS) |
Accessories & related products
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Temperature resistance (min.): -60 - 315 °C · Manufacturer: Elring · Material: Silicone · Color: gray · Contents: 70 ml · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Area of application: Chemistry · Gap dimension (max.): 2 mm
EUR 24.50
EUR 350.00/l
swiing® ingenious piston 41 mm | Sachs 50/2
Nominal diameter: 41 mm · Manufacturer: swiing® ingenious parts · Ø outside piston (A): 40.96 mm · Compression height (C): 28 mm · Curvature (D): 3.4 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 1.5 mm · Ø piston pin (B): 12 mm · Weight piston kit: 91 g
EUR 72.00
Hot 
swiing® ingenious 41 mm cylinder kit Racing fan-cooled | Sachs 50/2, 50/3, 50/4 (DE)
Nominal diameter: 41 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 51 x 40 · Camouflaged: No · Area of application: Racing
EUR 270.60
Not in stock
Explore categories from Seals & gaskets
Moped fans also bought
Inox
Hot
GPO license plate holder Inox (CH version)
Width: 105 mm · Height: 5.3 mm · Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Thread type: M5x0.8 (standard thread) · Total length: 145 mm · Mounting type: Nuts & bolts · Thread length: 8 mm · Ø mounting hole: 5 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Number of fixing points: 2 pcs
EUR 13.40
Hot
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
EUR 12.20
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
EUR 14.20
EUR 31.56/l
Hot
Manual indoor cable set
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.2 mm · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
EUR 12.20
Working late? Evening hours on Thursday until 20:00
