Additional stainless steel flywheel weight for all HPI ignition systems on your moped, scooter, and small motorcycle.
The plate fits perfectly on the rotor and is secured with three screws.
We recommend securing the screws with Loctite.
Weight of the plate without screws: 280 grams
; weight of the plate with screws: 300 grams.
The additional weight makes the engine run more smoothly at a standstill and makes it easier to start off without stalling the engine, which is often the case with a lighter flywheel.
Figure 3 shows the plate in its installed state.
A sophisticated product meeting the highest standards of the swiing® quality brand.
| Manufacturer | swiing® ingenious parts |
| Material | Chrome steel (colloquially known as stainless steel) |
| Area of application | Performance, Racing, High End, Tuning |
| Ø inside | 39 mm |
| Ø outside | 95 mm |
| Ø bolt circle | 55 mm, 50 mm |
| Weight | 300 g |
| Thickness | 12.5 mm |
| Number of fixing points | 7 pcs |
| Ø mounting hole | 10 mm, 5.5 mm |
| Universal | |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL , AML 50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS) , LKH (4.5 PS) 50/5 503 - AAL , ABL , 2AL / 2BL , AB , AC , ADV 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT) , 2A (HG) 508 - 1 A 535 |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta various Beta 521 (engine) |
| Zündapp Belmondo | |
| Zündapp | 434 Chassis (mountaineer) 278 Motor |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 27.00
EUR 2’700.00/l
Moped fans also bought
Hot 
Wippermann drive chain No.18 (double reinforced)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: Wippermann · Material: Steel · Color: gray · Surface: blank / oiled · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø bore: 4.2 mm · Ø Pin: 4.15 mm
EUR 41.70
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
EUR 13.40
EUR 29.78/l
Continental 2.00 - 2.50 x 17" tube
Manufacturer: Continental · Tire width: 2 - 2.5 " · Tire width: 2.25 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width: 2 " · Width: 2 1/4 " · Width: 2 1/2 " · Wheel size: 17 " · Tire height [%]: 100 · Old designation: 21 x 2 " · Old designation: 21 x 2.25 " · Old designation: 21 x 2.5 " · Valve type: TR6 car valve
EUR 18.30
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Material: Aluminum · Material: Steel · Tension: 12 V · Ø Internal flywheel: 61.5 mm · Area of application: Tuning · Ø cable: 7 mm · Light coil voltage: 12 V · Direction of rotation: left · Direction of rotation: right · Performance: 60 W · Ø mounting plate: 90 mm · Mounting type: Screws · Ø Flywheel outside: 71.5 mm · Weight: 340 g · Number of fixing points: 6 pcs
EUR 369.10
Hot
swiing® revival wheel axle LELEU & Grimeca wheel hub cast wheel rear | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø outside: 11.8 mm · Width across flats: 19 mm · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 11.9 mm · Shank length: 100 mm · Total length: 185 mm · Thread length: 26 mm · Thread length: 52.5 mm
EUR 18.30
Speedometer cable VDO (45 - 100 cm) black
Manufacturer: Made in Portugal · Color: black · Thread type: MF10x1 (fine pitch thread) · Outer shell length: 450 mm · Outer shell length: 500 mm · Outer shell length: 550 mm · Outer shell length: 600 mm · Outer shell length: 650 mm · Outer shell length: 700 mm · Outer shell length: 750 mm · Outer shell length: 800 mm · Outer shell length: 850 mm · Outer shell length: 900 mm · Outer shell length: 950 mm · Outer shell length: 1000 mm · 4-edge speedometer cable: 1.8 mm
EUR 10.90
Working late? Evening hours on Thursday until 20:00
