Battery-powered rev counter for adjusting the engine of your moped, moped and small motorcycle.
With this marvel of technology, you can precisely measure the speed and test and optimize any changes made. The measurable maximum speed is 16,000 rpm.
The crocodile clip supplied is attached to the ignition cable to show the brute force of your 2-stroke carriage in black and white. Alternatively, the measurement can be carried out either via the supplied cable antenna or at close range by means of telekinesis (inductive) by simply holding the plug connector.
Note: For the measurement of electronic ignitions, the device must be set accordingly. Instructions are included in the scope of delivery.
Other useful tools can be found under accessories.
Quality product from the German manufacturer STIHL.
| Manufacturer | STIHL |
| Material | Plastic |
| Color | white |
| Total length | 55 mm |
| Signal type Tacho | GPS / digital |
| Depth | 35 mm |
| Total height | 15 mm |
Ratings
Accessories & related products
Explore categories from Tools
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 3.94 mm · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø bore: 4 mm
EUR 15.00
Airsal 44 mm cylinder kit 65 ccm camouflaged | Puch
Nominal diameter: 44 mm · Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Inlet window: 24 / 20 x 15 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Camouflaged: Yes · Area of application: Tuning
EUR 107.50
Airsal gasket set 44 - 45 mm
Manufacturer: Airsal · Number of components: 4 pcs · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Area of application: Tuning · Ø cylinder: 44 mm · Ø cylinder: 45 mm · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
EUR 11.80
Hot
swiing® revival 12 mm carburetor "Original" | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Area of application: Standard · Component group Carburetor: Carburetor complete · Color: gray · Width: 50 mm · Carburetor type: SRE · Nominal diameter: 12 mm · Total length: 65 mm · Height: 108 mm · Ø Inside entrance: 12 mm · Mounting type: Plug connection clamped · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.15 · Nozzle size: 52 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0
EUR 83.60
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Reinforced: No · Ø inside: 27.4 mm · Thickness: 3 mm · Place of use: Exhaust · Ø outlet inside: 28 mm · Ø screw holder: 6.6 mm · Hole spacing outlet: 42.5 mm · Area of application: Tuning
EUR 8.85
Collection only possible with online purchase and appointment.
