Replica deco lever of the legendary Magura lever to operate the decompressor or starter mechanism on your Puch Maxi moped / moped or for universal use.
The starter lever made of aluminum and plastic can be attached to all standard handlebars with 22 mm and is fixed in place with a grub screw. The cable is inserted via a small opening on the lever and then clamped using the attached screw. The excess length of the remaining cable can then be hidden in the lever or shortened.
Other handle fittings, cable end pieces and a matching adjusting screw can be found in the accessories section.
Alternative to the original Puch spare part number: 349.1.32.030.0
| Ø inside | 22 mm |
| Material | Aluminum |
| Housing material | Aluminum |
| Material lever | Plastic |
| Color | black, silver |
| Mounting type | Screws |
| Puch OEM number | 349.1.32.030.0 |
| Universal |
| Puch |
Ratings
Accessories & related products
Shift lever 2-speed (Magura-Edition) black
Manufacturer: Magura · Material: Plastic · Surface: powder-coated · Material lever: Aluminum · Housing material: Aluminum · Color: black · Color: silver · Number of gears: 2 pcs · Ø inside: 22 mm · Total length: 145 mm · Ø outside: 26 mm
EUR 233.70
Not in stock
Magura adjusting screw brake short
Manufacturer: Magura · Material: Brass · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Color: silver · Ø shaft: 6.1 mm · Drive: Knurled screw · Total length: 31 mm · Total length: 40 mm · Ø External head: 9.15 mm · Thread length: 15 mm · Shank length: 6.9 mm
EUR 4.20
Magura deco / clutch lever black
Manufacturer: Magura · Material: Plastic · Material: Steel · Surface: burnished · Housing material: Steel · Material lever: Plastic · Color: black · Total length: 94 mm · Thread type: M5x0.8 (standard thread) · Mounting type: Screws · Number of fixing points: 2 pcs · Ø inside: 22 mm
EUR 61.40
Explore categories from Handles & fittings
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: KMC · Surface: blank / oiled · Number of chain links: 128 pcs · Material: Steel · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Color: gray · Ø bore: 4 mm · Ø Pin: 3.94 mm
EUR 15.40
Starter cable Ø 1.5 mm x 160 cm | Puch Maxi
Ø nipple: 8 mm · Nipple length: 12 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.5 mm · Cable length: 1600 mm · Nipple shape: Barrel (transverse) · Area of application: Standard
EUR 2.95
Hot
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Thread type: MF12x1 (fine pitch thread)
EUR 12.20
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Material: Brass · Material: Steel · Surface: nickel-plated · Ø Cable bushing: 1.6 mm · Manufacturer: Magura · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Drive: Slot · Screw head: Lens head · Thread length: 4 mm · Total length: 6 mm
EUR 2.45
Hot
swiing® revival side protection screw set black | Puch Maxi S
Drive: Slot · Drive: Triangular head · Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Thread type: M5x0.8 (standard thread) · Thread length: 35 mm · Thread length: 50 mm · Total length: 47 mm · Total length: 60 mm
EUR 15.90
Hot
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Quantity: 4 pcs · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 1600 mm · Total length: 2200 mm
EUR 12.20
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
