Original brake disc for the front wheel and rear wheel of various mopeds, mopeds and small motorcycles.
The return cable spring for the brake lever is not included in the scope of delivery.
Mounting thread adjusting screw: M6
Distance wheel axle mounting cams to fork: 40 - 90 mm
Ø wheel axle: 11 mm
Ø brake drum: 90 mm
Hub type: V 905 (front wheel)
Due to years of storage, the brake plates may show signs of corrosion.
Matching add-on parts for the brake plate such as brake pads, clamping screws etc. can be found in the accessories section.
NOS – New from old stock. Original Sachs spare part number: F 5110
| Manufacturer | Sachs |
| Ø drum | 90 mm |
| Ø axle | 11 mm |
| Thread size | M6 |
| Puch |
| Sachs |
| Zündapp Belmondo |
Accessories & related products
Hot 
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Surface: galvanized (blue) · Number of components: 1 pcs · Area of application: Standard
EUR 2.95
swiing® revival clamp brake cable | Pony / Cilo (P8343)
Ø Cable bushing: 2.9 mm · Manufacturer: swiing® revival parts · Material: Steel · Total length: 17 mm · Screw head: Hexagon · Surface: galvanized (blue) · Ø outside: 12 mm · Width across flats: 10 mm · Ø shaft: 8.5 mm · Drive: External hexagon · Number of components: 3 pcs · Thread type: M6x1 (standard thread) · Thread length: 9 mm
EUR 4.20
Magura set screw M6x34 mm lock nut SW10
Width across flats Screw: 8 mm · Manufacturer: Magura · Width across flats nut: 10 mm · Material: Brass · Ø cable holder: 3.05 mm · Total length: 34 mm · Slotted: No · Surface: nickel-plated · Ø Receptacle: 7.05 mm · Thread type: M6x1 (standard thread) · Thread length: 23 mm
EUR 3.05
swiing® revival nut M11x1 x 4 SW17 wheel nut galvanized
Manufacturer: swiing® revival parts · Material: Steel · Nut type: Hexagon nut · Height: 4 mm · Nominal diameter (thread): 11 mm · Surface: galvanized (blue) · Width across flats: 17 mm · Strength class: 8 · Drive: External hexagon · Thread type: MF11x1 (fine pitch thread)
EUR 3.55
Explore categories from Hub & axle
Moped fans also bought
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø Cable bushing: 1.6 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Total length: 6 mm · Screw head: Lens head · Surface: nickel-plated · Ø outside: 5 mm · Drive: Slot · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
EUR 2.45
Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm
Ø nipple: 6 mm · Nipple length: 5.5 mm · Manufacturer: Made in Germany · Material: Brass · Material: Steel · Ø Stranded wire: 1.2 mm · Cable length: 2000 mm · Nipple shape: Barrel (transverse) · Surface: galvanized (blue) · Number of components: 1 pcs · Area of application: Standard
EUR 4.20
Rim ring 1.50 x 17" (45 mm) chrome
Ø Nipple hole: 6.5 mm · Manufacturer: Made in Italy · Material: Steel · Surface: chrome-plated · Color: Chrome · Rim well depth: 7.5 mm · Wheel size: 17 " · Nominal diameter: 432 mm · Jaw width [inch]: 1.5 " · Jaw width [mm]: 38.5 mm · Overall width outside: 56 mm · Number of spoke holes: 36 pcs
EUR 86.00
swiing® revival clamp brake cable | Pony / Cilo (P8343)
Ø Cable bushing: 2.9 mm · Manufacturer: swiing® revival parts · Material: Steel · Total length: 17 mm · Screw head: Hexagon · Surface: galvanized (blue) · Ø outside: 12 mm · Width across flats: 10 mm · Ø shaft: 8.5 mm · Drive: External hexagon · Number of components: 3 pcs · Thread type: M6x1 (standard thread) · Thread length: 9 mm
EUR 4.20
Working late? Evening hours on Thursday until 20:00
