High-quality 21 mm CP carburetor kit with clamp connection for your moped, moped and small motorcycle.
The set was designed by Polini for the Puch Maxi S, N moped / moped models with E50 engine, but can also be used universally for countless other makes and models.
During the development of the CP models, special emphasis was placed on size and weight, making this carburetor particularly compact and around 40% lighter than conventional carburetors.
Due to the compact design, the intake path is very short. Unique is the concentric design of the passage, i.e. a circular passage instead of an oval one as with most other carburettors - a geometry that optimizes the air flow. Modifications to the mixing tube and the use of a larger needle ensure better atomization of the gas mixture.
This should simplify the tuning of the carburetor and enable high performance with low consumption. In addition, all CP carburetors have an oil and vacuum connection.
| Nominal diameter | 21 mm |
| Manufacturer | Polini |
| Material | Aluminum |
| Component group Carburetor | Carburetor complete |
| Carburetor type | CP |
| Ø without reducing sleeve | 25 mm |
| Mounting type | Plug connection |
| Ø Internal connection | 24 mm |
| Ø Air filter connection | 46 mm |
| Ø fuel hose connection | 6 mm |
| Mixed oil connection | Yes |
| Vacuum connection | Yes |
| Choke control | Cable choke |
| Nozzle thread | M5x0.8 (standard thread) |
| Nozzle size | 100 |
| Size of secondary nozzle | 40 |
| Area of application | Tuning |
| Puch |
Ratings
Accessories & related products
Polini 24 mm carburetor (hand choke)
Nominal diameter: 24 mm · Manufacturer: Polini · Component group Carburetor: Carburetor complete · Carburetor type: Flat slide valve · Ø Air filter connection: 49 mm · Ø fuel hose connection: 6 mm · Mounting type: Plug connection · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Area of application: Tuning
EUR 185.70
Polini jet set (120 - 138) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Component group Carburetor: Spraying · Material: Brass · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Quantity: 10 pcs · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 120 · Nozzle size: 122 · Nozzle size: 124 · Nozzle size: 126 · Nozzle size: 128 · Nozzle size: 130 · Nozzle size: 132 · Nozzle size: 134 · Nozzle size: 136 · Nozzle size: 138
EUR 49.40
Polini jet set (140 - 158) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Component group Carburetor: Spraying · Material: Brass · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Quantity: 10 pcs · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 140 · Nozzle size: 142 · Nozzle size: 144 · Nozzle size: 146 · Nozzle size: 148 · Nozzle size: 150 · Nozzle size: 152 · Nozzle size: 154 · Nozzle size: 156 · Nozzle size: 158
EUR 49.40
Polini 26 mm carburetor (hand choke)
Nominal diameter: 26 mm · Manufacturer: Polini · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: Flat slide valve · Choke control: Hand choke · Total length: 83 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Nozzle size: 105 · Ø Inside entrance: 26 mm · Width: 65 mm · Ø Output inside: 26 mm · Height: 155 mm · Ø Air filter connection: 49 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Size of secondary nozzle: 45
EUR 179.50
Polini 32 mm carburetor (hand choke)
Nominal diameter: 32 mm · Manufacturer: Polini · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: Flat slide valve · Choke control: Hand choke · Total length: 83 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Nozzle size: 122 · Ø Inside entrance: 32 mm · Width: 78 mm · Ø Output inside: 32 mm · Height: 155 mm · Ø Air filter connection: 55 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Size of secondary nozzle: 42
EUR 235.30
Polini racing exhaust "for race" blanco | Puch Maxi, X30
Manufacturer: Polini · Material: Steel · Surface: blank · Ø Silencer: 60 mm · Exhaust type: Cone / double cone · Number of fixing points: 2 pcs · Total length: 900 mm · Flame tube attachment: Flange · Flame tube attachment: suspended
EUR 458.30
Moped fans also bought
GPO 45 mm cylinder kit 70 ccm | Puch
Nominal diameter: 45 mm · Material: Aluminum · Number of fixing points: 4 pcs · Manufacturer: GPO · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 47.8 mm · Ø outlet inside: 24.6 mm · Inlet window: 21.8 x 14.6 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Area of application: Tuning · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No
EUR 123.80
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Ø inside: 4.8 mm · Total length: 28 mm · Ø outside: 8.3 mm · Area of application: Tuning · Color: blue · Number of components: 3 pcs
EUR 22.20
swiing® revival nozzle set M3.5 (44 - 54) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Quantity: 6 pcs · Component group Carburetor: Spraying · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Total length: 6 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 44 · Nozzle size: 46 · Nozzle size: 48 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 54
EUR 19.70
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Total length: 135 mm · Height: 55 mm · Manufacturer: GPO · Camouflaged: Yes · Material: Aluminum · Surface: sandblasted · Ø cylinder: 45 mm · Width: 125 mm · Hole pattern [mm]: 44 x 44 · Candle thread: short · Number of fixing points: 4 pcs · Area of application: Tuning · Decompressor: No
EUR 40.80
Athena 45 mm cylinder kit 70 ccm camouflaged | Puch
Nominal diameter: 45 mm · Material: Aluminum · Number of fixing points: 4 pcs · Manufacturer: Athena · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 23.5 mm · Inlet window: 22.3 x 14 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Area of application: Tuning · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes
EUR 196.90
Polini jet set (120 - 138) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Component group Carburetor: Spraying · Material: Brass · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Quantity: 10 pcs · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 120 · Nozzle size: 122 · Nozzle size: 124 · Nozzle size: 126 · Nozzle size: 128 · Nozzle size: 130 · Nozzle size: 132 · Nozzle size: 134 · Nozzle size: 136 · Nozzle size: 138
EUR 49.40
GPO 12 mm intake manifold Puch X30 NG-2AH
Manufacturer: GPO · Ø inside: 12 mm · Material: Aluminum · Camouflaged: No · Area of application: Original · Ø External connection: 20 mm · Hole spacing inlet: 32 - 38 mm · Number of fixing points: 2 pcs · Total height: 63 mm · Height flange center hole: 52.5 mm · Total length: 53 mm · Mounting type: Screws
EUR 49.40
swiing® ingenious clutch springs reinforced (+50%) | Puch E50
Spring design: Pressure spring · Ø wire: 2 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Ø inside: 4.3 mm · Ø outside: 8.45 mm · Total length: 26.6 mm · Color: red · Number of components: 3 pcs · Area of application: Tuning
EUR 22.20
Collection only possible with online purchase and appointment.
