Polini has placed particular emphasis on size and weight in the development of the CP model; this carburetor is therefore particularly compact and around 40% lighter than traditional carburetors.
Due to the compact design, the intake path is very short. Unique is the concentric design of the passage, i.e. a circular passage instead of an oval one as with most other carburettors - a geometry that optimizes the air flow. Modifications to the mixing tube and the use of a larger needle ensure better atomization of the gas mixture.
This is intended to simplify carburetor tuning and enable high performance with low consumption. All CP carburetors have an oil and vacuum connection.
Inlet connection diameter: 24 or 26 mm if the bushes are removed.
Connection diameter of air filter: 46 mm
Main nozzle size: 56
Side nozzle size: 38
Choke is located directly on the carburetor and must be operated by hand.
Special Polini nozzles must be used.
Quality product from the Italian manufacturer Polini.
| Nominal diameter | 15 mm |
| Manufacturer | Polini |
| Component group Carburetor | Carburetor complete |
| Carburetor type | CP |
| Choke control | Hand choke |
| Ø fuel hose connection | 6 mm |
| Nozzle thread | M5x0.8 (standard thread) |
| Nozzle size | 56 |
| Ø without reducing sleeve | 26 mm |
| Ø Air filter connection | 46 mm |
| Ø Internal connection | 24 mm |
| Mixed oil connection | Yes |
| Vacuum connection | Yes |
| Mounting type | Plug connection clamped |
| Area of application | Tuning |
| Size of secondary nozzle | 38 |
Ratings
Moped fans also bought
Polini 43.5 mm cylinder kit reed | Puch
Manufacturer: Polini · Material: Aluminum · Surface: Nickel silicon carbide (known as Nikasil®) · Area of application: Racing · Area of application: Tuning · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 43.5 mm · Ø cylinder neck: 48 mm · Inlet window: 26 x 21 · Thread inlet: M5x0.8 (standard thread) · Ø outlet inside: 22 mm · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Outlet type: straight · Hole spacing inlet: 32 mm · Hole spacing inlet: 39 mm · Thread outlet: M6x1 (standard thread) · Camouflaged: No
EUR 399.30
swiing® revival upright spring blue galvanized | Puch
Spring design: Tension spring · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: galvanized (blue) · Ø inside: 9 mm · Ø wire: 2.5 mm · Ø outside: 14 mm · Length spring hook: 19 mm · Length spring hook: 53 mm · Total length: 122 mm
EUR 3.35
swiing® revival gasket set Z50 engine | Puch X30 NS / NL
Manufacturer: swiing® revival parts · Material: Sealing paper · Ø outlet inside: 22 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 · Number of components: 10 pcs · Hole spacing outlet: 42 mm · Area of application: Standard
EUR 24.50
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
EUR 12.20
EUR 27.11/l
EBR telescopic fork aluminum (Harry) silver | Puch
Manufacturer: EWC · Surface: chrome-plated · Surface: varnished · Adjustable: Yes · Material: Aluminum · Thread type: MF26x1 (fine pitch thread) · Material: Steel · Ø spars: 30 mm · Color: Chrome · Color: silver · Spar end distance (center-center): 150 mm · Ø outer head tube: 26 mm · Ø head tube inside: 22 mm · Head tube length: 200 mm · Total length: 705 mm · Fork bridge - center wheel axle: 458 mm · Thread length: 57 mm
EUR 301.00
Collection only possible with online purchase and appointment.
