
Örnchen made of transparent plastic for emptying hard-to-reach areas on your moped, moped and small motorcycle.
The finely adjustable finger pump and the flexible outlet hose make the oil syringe an extremely practical tool in your workshop.
The contents of the can are first separated from solids by a sieve and then pumped upwards by gentle pumping. Thanks to the perfectly adjustable hose, the lubrication pump can also be used in awkward positions. The tapered tip helps with fine dosing.
The tank can be easily unscrewed for filling.
Can material: PET
Capacity: 275 ml
Hose length: 240 mm
Further lubrication and oil filling aids can be found in the accessories section.
| Material | Plastic |
| Surface | raw |
| Color | transparent, black |
| Capacity | 275 ml |
| Area of application | Workshop accessories |
Accessories & related products
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Temperature resistance (min.): -30 - 220 °C · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
EUR 13.40
EUR 29.78/l
Polini oil measuring container 250 ml (with 7 mixing ratios)
Material: Plastic · Manufacturer: Polini · Surface: raw · Diameter: 50 mm · Capacity: 250 ml · Color: blue · Color: transparent · Mass display: 1:100 (1%) · Mass display: 1:50 (2%) · Mass display: 1:33 (3%) · Mass display: 1:25 (4%) · Mass display: 1:20 (5%) · Mass display: 1:16 (6%) · Mass display: 1:14 (7%) · Height: 170 mm · Area of application: Workshop accessories
EUR 7.25
EUR 6.50
Explore categories from Petrol cans & measuring containers
Moped fans also bought
GPO license plate holder Inox (CH version)
Material: Chrome steel (colloquially known as stainless steel) · Manufacturer: GPO · Thread type: M5x0.8 (standard thread) · Color: silver · Ø mounting hole: 5 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Height: 5.3 mm · Total length: 145 mm · Mounting type: Nuts & bolts · Width: 105 mm · Thread length: 8 mm · Number of fixing points: 2 pcs
EUR 13.40
Magura adjusting screw brake long
Material: Brass · Manufacturer: Magura · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Drive: Knurled screw · Color: silver · Ø External head: 9.1 mm · Ø shaft: 6 mm · Shank length: 11 mm · Total length: 47 mm · Total length: 65 mm · Thread length: 24 mm
EUR 4.80
Plastic license plate holder (CH version)
Total length: 175 mm · Manufacturer: Made in Switzerland · Material: Brass · Material: Plastic · Color: black · Width: 108 mm · Mounting type: Nuts & bolts · Hole spacing: 50 mm · Number of fixing points: 9 pcs · Height: 11 mm · Thread type: M5x0.8 (standard thread) · Thread length: 6 mm · Ø mounting hole: 6 mm
EUR 9.75
Magura set screw M5x34 mm
Slotted: No · Width across flats Screw: 8 mm · Manufacturer: Magura · Width across flats nut: 8 mm · Material: Brass · Surface: nickel-plated · Thread type: M5x0.8 (standard thread) · Ø Receptacle: 7.05 mm · Ø cable holder: 2.55 mm · Thread length: 24 mm · Total length: 34 mm
EUR 3.05
Bearing cone M11x1 mm
Material: Steel · Surface: gas nitrided · Thread type: MF11x1 (fine pitch thread) · Color: graphite colors · Ø outside: 19 mm · Height: 12 mm · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Ø ball [inch] / [mm]: 3/16" (4.78 mm) · Ø ball [inch] / [mm]: 7/32" (5.56 mm) · Width across flats: 15 mm
EUR 9.75






