Shaft seal ring 22x35x6 mm for use on the gearbox of your Piaggio Ciao C9 moped / moped with splined gearbox (Mono and Vario).
This shaft seal ring (colloquially known as a radial shaft seal) is fitted in the gearbox on the brake pad side.
Ø inner: 22 mm
Ø outer: 35 mm
Width: 6 mm
Material: NBR
Temperature-resistant: -30 to +100 °C, briefly up to 120 °C
Type: A - With rubberized outer casing and a sealing lip.
Please note that all Piaggio models after the Ciao C9 with rigid fork no longer had a splined gearbox fitted as standard. For this reason, these transmissions require a shaft seal with the dimensions 30x20x5 mm on the brake side.
You can find this oil seal and other parts for your Piaggio transmission in the accessories section.
Quality product from the Italian manufacturer Piaggio in original equipment quality.
Original Piaggio spare part number: 008752
| Shaft seal type | A - With rubberized outer part / one sealing lip. |
| Manufacturer | Piaggio |
| Material | NBR |
| Surface | rubberized |
| Ø outside | 35 mm |
| Ø inside | 22 mm |
| Width | 6 mm |
| Temperature resistance (min.) | -30 - 100 °C |
| Piaggio | Ciao - P , SC , PX , C24 Si Bravo / Super Bravo Boxer Grillo |
Ratings
Accessories & related products
Triangular bearing plate galvanized | Piaggio Ciao, SI, Bravo, Grillo
Manufacturer: Made in Italy · Area of application: Original · Material: Steel · Surface: galvanized (blue) · Total length: 17.5 mm · Width: 99 mm · Ø axle: 15 mm · Thread length: 13 mm · Number of fixing points: 2 pcs · Thread type: M10x1.5 (standard thread) · Piaggio OEM number: 124963
EUR 24.50
swiing® ingenious triangular bearing plate aluminum red | Piaggio Ciao, SI, Bravo, Grillo
Total length: 13 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: red · Width: 101 mm · Ø axle: 15 mm · Thread type: M10x1.5 (standard thread) · Area of application: Racing · Area of application: Tuning · Thread length: 13 mm · Number of fixing points: 2 pcs · Alternative version of the Piaggio OEM number: 124963
EUR 46.60
Oil seal NBR 20/30/5 A Gearbox original | Piaggio Ciao, SI, Bravo, Boxer
Shaft seal type: A - With rubberized outer part / one sealing lip. · Manufacturer: Piaggio · Material: NBR · Surface: rubberized · Width: 5 mm · Ø inside: 20 mm · Ø outside: 30 mm · Temperature resistance (min.): -30 - 100 °C
EUR 7.25
Malossi SAE 75W-90 gear oil "RACING" 250 ml
Manufacturer: Malossi · Viscosity (SAE): 75W-90 · Oil type: GL4 · Oil type: fully synthetic · Contents: 250 ml · Gearbox type: Automatic machine · Gearbox type: Mono · Gearbox type: Vario · Area of application: Gearbox lubrication without clutch
EUR 12.20
EUR 48.80/l
Malossi SAE 80W-90 gear oil "SPORT" 250 ml
Manufacturer: Malossi · Viscosity (SAE): 80W-90 · Oil type: GL4 · Oil type: GL5 · Contents: 250 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Gearbox type: Mono · Gearbox type: Vario · Area of application: Gearbox lubrication without clutch
EUR 10.90
EUR 43.60/l
Explore categories from Drive & transmission
Moped fans also bought
Hot 
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.80
Hot
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 12.20
Karcoma fuel filter plastic small
Manufacturer: Karcoma · Material: Plastic · Color: transparent · Color: white · Total length: 23.4 mm · Total length: 50 mm · Filter type: Plastic net · demountable: No · Ø inside: 3 mm · Ø outside: 20 mm · Ø fuel hose connection: 4.9 mm · Ø fuel hose connection: 6 mm
EUR 7.15
Oil seal NBR 17/25/4 A Gearbox Mono original | Piaggio Ciao, SI, Bravo, Boxer
Shaft seal type: A - With rubberized outer part / one sealing lip. · Ø inside: 17 mm · Ø outside: 25 mm · Manufacturer: Piaggio · Material: NBR · Surface: rubberized · Width: 4 mm · Temperature resistance (min.): -30 - 100 °C
EUR 7.25
Not in stock
CUBE 6202 2RS ball bearing 15/35/11
Bearing cage: Sheet steel cage ball-guided · Inner ring width: 11 mm · Manufacturer: CUBE · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CN (standard) · Stock number: 6202 · Bearing type: Deep groove ball bearing · Width: 11 mm · Ø inside: 15 mm · Ø outside: 35 mm · Ball bearing closed: Yes
EUR 5.80
Corteco oil seal NBR 17/25/4 A Gearbox Mono | Piaggio Ciao, SI, Bravo, Boxer
Shaft seal type: A - With rubberized outer part / one sealing lip. · Ø inside: 17 mm · Ø outside: 25 mm · Manufacturer: Corteco · Material: NBR · Surface: rubberized · Width: 4 mm · Place of use: Gearbox cover · Temperature resistance (min.): -30 - 100 °C · Piaggio OEM number: 114469
EUR 6.80
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
