
O-ring for racing and tuning cylinder heads of Puch Maxi S / N, Puch X30 Sport NS / NL, Puch X30 Sport N-2AH, Puch X30 Velux and converted Puch Supermaxi LG1 & LG2 mopeds / mopeds.
This O-ring made of fluorine rubber FPM / FKM (commonly known as Viton) is temperature-resistant up to 200°C and therefore significantly more resilient than conventional NBR sealing rings. It offers outstanding resistance to oils, fuels and chemicals and is ideal for demanding applications with high temperatures or aggressive media.
The sealing ring can only be used on cylinder heads with a corresponding groove. You can find a selection of these in the accessories section.
| Material | FPM / FKM (colloquially known as Viton) |
| Ø inside | 44 mm |
| Place of use | Cylinder head |
| Cord thickness | 1.8 mm |
| Temperature resistance (min.) | 0 - 200 °C |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Accessories & related products
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Number of components: 4 pcs · Ø cylinder: 38 mm · Thickness: 0.3 mm · Thickness: 0.4 mm · Thickness: 1.8 mm · Ø outlet inside: 22 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
EUR 8.85
Elring Dirko HT sealing compound red (silicone) high temp. 70 ml elastic up to 315°C
Manufacturer: Elring · Area of application: Chemistry · Color: red · Contents: 70 ml · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Temperature resistance (min.): -60 - 300 °C · Gap dimension (max.): 2 mm
EUR 27.40
EUR 391.43/l
GPO cylinder stud bolt set special M6x106 mm galvanized | Puch
Drive: External hexagon · Thread type: M6x1 (standard thread) · Manufacturer: GPO · Material: Steel · Diameter: 7 mm · Surface: galvanized (blue) · Width across flats: 10 mm · Strength class: 10 · Strength class: 10.9 · Total length: 106 mm · Thread length: 15 mm · Thread length: 19 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 23.80
Explore categories from Seals & O-rings
Moped fans also bought
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Cable length: 2200 mm · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Surface: galvanized (blue)
EUR 2.85
Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm
Cable length: 2000 mm · Ø nipple: 6 mm · Nipple length: 5.5 mm · Manufacturer: Made in Germany · Material: Brass · Area of application: Standard · Material: Steel · Number of components: 1 pcs · Ø Stranded wire: 1.2 mm · Nipple shape: Barrel (transverse) · Surface: galvanized (blue)
EUR 4.05
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Oil type: GL4 · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
EUR 11.80
EUR 26.22/l
GPO piston 41 mm (12 mm KoBo) | Puch X30 Velux, M50, MS50, VS50, DS50, VZ50
Nominal diameter: 41 mm · Manufacturer: GPO · Ø outside piston (A): 40.94 mm · Compression height (C): 23.2 mm · Curvature (D): 3.7 mm · Total piston height (E): 49.3 mm · Number of piston rings (F): 2 pcs · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Weight piston kit: 85 g
EUR 59.70
Magura cable clamp Sachs shift/clutch arm
Drive: External hexagon · Drive: Slot · Thread type: M4x0.7 (standard thread) · Manufacturer: Magura · Material: Brass · Material: Steel · Number of components: 2 pcs · Ø Cable bushing: 2.8 mm · Screw head: Hexagon · Surface: galvanized (blue) · Surface: nickel-plated · Width across flats: 6 mm · Ø Bundle: 7 mm · Ø shaft: 4 mm · Ø outside: 7 mm · Total length: 11 mm · Thread length: 7 mm
EUR 3.00








