Jetset with five medium-high main jets suitable for Mikuni VM, TM and TMX carburetors.
The following jet sizes are included in the set: 65, 70, 75, 80, 85
With this selection, the fuel-air mixture of your carburetor can be perfectly tuned.
Note: These carburetor jets for Mikuni carburetors are not only described by the physical size (the diameter of the jet hole) like many other carburetor jets, but by the actual flow rate. This means that the Mikuni size specification refers to the amount of fuel that can flow through the nozzle per unit of time.
So if you are using carburettor jets from different manufacturers, you need to be careful, as other manufacturers may describe the diameter of the jet hole.
| Drive | External hexagon |
| Total length | 11.6 mm |
| Material | Brass |
| Quantity | 5 pcs |
| Component group Carburetor | Spraying |
| Carburetor type | Mikuni (VM, TM, TMX) |
| Nozzle type | Main nozzle |
| Nozzle thread | M5.3x0.9 (standard thread) |
| Width across flats | 6 mm |
| Nozzle size | 65, 70, 75, 80, 85 |
| Thread length | 4.7 mm |
Accessories & related products
MIKUNI 24 mm flat slide carburetor TM24-9 hand choke
Nominal diameter: 24 mm · Width: 75 mm · Height: 130 mm · Manufacturer: MIKUNI · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: Flat slide valve · Ø Air filter connection: 44 mm · Ø fuel hose connection: 6 mm · Mounting type: Plug connection · Choke control: Hand choke · Nozzle thread: M5.3x0.9 (standard thread) · Nozzle size: 130 · Size of secondary nozzle: 51
EUR 239.90
NC-Motorparts M5 Jet Set (48–66) Mikuni Replica
Manufacturer: NCMotorparts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PWK · Drive: External hexagon · Nozzle type: Main nozzle · Width across flats: 6 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 48 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 54 · Nozzle size: 56 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66
EUR 30.60
NC-Motorparts Jet Set M5 (108–126) Mikuni Replica
Manufacturer: NCMotorparts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PWK · Drive: External hexagon · Nozzle type: Main nozzle · Width across flats: 6 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 108 · Nozzle size: 110 · Nozzle size: 112 · Nozzle size: 114 · Nozzle size: 116 · Nozzle size: 118 · Nozzle size: 120 · Nozzle size: 122 · Nozzle size: 124 · Nozzle size: 126
EUR 30.60
NC-Motorparts Jet Set M5 (130–148) Mikuni Replica
Manufacturer: NCMotorparts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PWK · Drive: External hexagon · Nozzle type: Main nozzle · Width across flats: 6 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 130 · Nozzle size: 132 · Nozzle size: 134 · Nozzle size: 136 · Nozzle size: 138 · Nozzle size: 140 · Nozzle size: 142 · Nozzle size: 144 · Nozzle size: 146 · Nozzle size: 148
EUR 30.60
Nozzle set M5.3 (190 - 210) "half-height" | Mikuni VM, TM, TMX
Total length: 11.6 mm · Material: Brass · Component group Carburetor: Spraying · Quantity: 5 pcs · Carburetor type: Mikuni (VM, TM, TMX) · Drive: External hexagon · Nozzle type: Main nozzle · Thread length: 4.7 mm · Width across flats: 6 mm · Nozzle thread: M5.3x0.9 (standard thread) · Nozzle size: 190 · Nozzle size: 195 · Nozzle size: 200 · Nozzle size: 205 · Nozzle size: 210
EUR 28.20
Nozzle set M5.3 (165 - 185) "half-height" | Mikuni VM, TM, TMX
Material: Brass · Component group Carburetor: Spraying · Quantity: 5 pcs · Carburetor type: Mikuni (VM, TM, TMX) · Total length: 11.6 mm · Drive: External hexagon · Nozzle type: Main nozzle · Thread length: 4.7 mm · Width across flats: 6 mm · Nozzle thread: M5.3x0.9 (standard thread) · Nozzle size: 165 · Nozzle size: 170 · Nozzle size: 175 · Nozzle size: 180 · Nozzle size: 185
EUR 28.20
Nozzle set M5.3 (140 - 160) "half-height" | Mikuni VM, TM, TMX
Material: Brass · Component group Carburetor: Spraying · Quantity: 5 pcs · Carburetor type: Mikuni (VM, TM, TMX) · Total length: 11.6 mm · Drive: External hexagon · Nozzle type: Main nozzle · Thread length: 4.7 mm · Width across flats: 6 mm · Nozzle thread: M5.3x0.9 (standard thread) · Nozzle size: 140 · Nozzle size: 145 · Nozzle size: 150 · Nozzle size: 155 · Nozzle size: 160
EUR 28.20
Nozzle set M5.3 (115 - 135) "half-height" | Mikuni VM, TM, TMX
Material: Brass · Component group Carburetor: Spraying · Quantity: 5 pcs · Carburetor type: Mikuni (VM, TM, TMX) · Drive: External hexagon · Nozzle type: Main nozzle · Total length: 11.6 mm · Thread length: 4.7 mm · Width across flats: 6 mm · Nozzle thread: M5.3x0.9 (standard thread) · Nozzle size: 115 · Nozzle size: 120 · Nozzle size: 125 · Nozzle size: 130 · Nozzle size: 135
EUR 28.20
Nozzle set M5.3 (90 - 110) "half-height" | Mikuni VM, TM, TMX
Material: Brass · Component group Carburetor: Spraying · Quantity: 5 pcs · Carburetor type: Mikuni (VM, TM, TMX) · Total length: 11.6 mm · Drive: External hexagon · Nozzle type: Main nozzle · Thread length: 4.7 mm · Width across flats: 6 mm · Nozzle thread: M5.3x0.9 (standard thread) · Nozzle size: 90 · Nozzle size: 95 · Nozzle size: 100 · Nozzle size: 105 · Nozzle size: 110
EUR 28.20
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Area of application: Standard · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Total length: 15 mm · Screw head: Hexagon · Ø outside: 8 mm · Thread type: M6x1 (standard thread) · Ø Bundle: 6 mm · Width across flats: 7 mm · Thread length: 7 mm
EUR 3.05
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Nipple length: 5 mm
EUR 2.95
Starter cable Ø 1.5 mm x 140 cm | Puch X30 NG, 2AH, Maxi S-2A, L, Supermaxi LG2
Ø nipple: 5.2 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Ø Stranded wire: 1.5 mm · Cable length: 1400 mm · Nipple shape: Barrel (transverse) · Number of components: 1 pcs · Nipple length: 6.8 mm
EUR 3.20
GPO pedal crank right chrome 153 mm strong cranked
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Crank length (center-center): 123 mm · Thread type: FG14.3 (9/16" 20G) · Ø Pedal wedge: 9.5 mm · Ø Pedal axle: 16 mm · Total length: 153 mm · Cranking (offset): 40 mm
EUR 36.80
Not in stock
GPO pedal cranks chrome 153 mm strong cranked
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Crank length (center-center): 123 mm · Ø Pedal wedge: 9.5 mm · Ø Pedal axle: 16 mm · Cranking (offset): 40 mm · Thread type: FG14.3 (9/16" 20G) · Total length: 153 mm
EUR 61.40
Not in stock
Mushroom air filter foam black, Dell'Orto PHBG (Ø=32 mm)
Material: Foam · Camouflaged: No · Material: Rubber · Ø outside: 60 mm · Filter type: Foam · Total length: 110 mm · Color: black · Ø Internal connection: 28 mm · Ø Internal connection: 32 mm · Area of application: Tuning · Mounting type: Plug connection clamped
EUR 15.90
Working late? Evening hours on Thursday until 20:00
