Removed spark plug cap in sporty blue for your moped, moped and small motorcycle.
The resistor in the spark plug cap prevents magnetic interference with the ignition and is particularly recommended when using an electronic ignition system (HPI, PVL, Selettra, VEC, etc.).
The copper terminal is placed over the ignition cable and then pushed into the plug.
The copper terminal is placed over the ignition cable and then pushed into the plug. As the ignition plug has a 6 mm SAE clamping receptacle, the end cap remains mounted on the ignition plug.
| Manufacturer | NGK |
| Material | Silicone |
| Color | blue |
| Spark plug socket | SAE |
| Cable available | No |
| Suppressed | Yes |
| Resistance | 5 Ω |
| Ø cable | 7 mm |
| Subcategory | Spark plug connector |
Ratings
Accessories & related products
GPO 6V ignition coil | Hercules Prima, Optima
Ø mounting hole: 5.2 mm · Manufacturer: GPO · Place of use: External (outside the ignition) · Area of application: Original · Area of application: Standard · Ø cable holder: 7.8 mm · Color: black · Number of fixing points: 4 pcs · Mounting type: Screws · Hole spacing: 53 mm · BOSCH OEM number: 0212940
EUR 59.40
NGK CR4 Racing ignition cable & plug High End red
Cable length: 500 mm · Manufacturer: NGK · Material: Silicone · Color: red · Spark plug socket: SAE · Cable available: Yes · Suppressed: Yes · Resistance: 5000 Ω · Subcategory: Ignition cable · Subcategory: Spark plug connector · Ø cable: 7 mm
EUR 40.80
Moped fans also bought
Hot 
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.90
Magura set screw M6 x 34 lock nut SW8
Slotted: No · Width across flats Screw: 8 mm · Manufacturer: Magura · Width across flats nut: 8 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Ø cable holder: 3.05 mm · Ø Receptacle: 7.05 mm · Thread length: 24 mm · Total length: 34 mm
EUR 3.10
Hot
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Nipple length: 10 mm · Number of components: 1 pcs
EUR 2.95
BING O-ring Bing SRE & 85, Ø 20 mm
Manufacturer: BING · Material: Rubber · Surface: raw · Color: black · Ø inside: 17.2 mm · Cord thickness: 1.4 mm · Ø outside: 20 mm · Place of use: Carburetor · Area of application: Standard · Number of components: 1 pcs · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
EUR 3.60
GPO piston stopper M14x1.25
Material: Steel · Total length: 83 mm · Manufacturer: GPO · Surface: galvanized (blue) · Diameter: 12 mm · Diameter: 16 mm · Thread type: MF14x1.25 (fine pitch thread) · Width across flats: 17 mm · Area of application: Special tool · Number of components: 1 pcs
EUR 11.80
Not in stock
swiing® revival screw set PVL ignition
Material: Steel · Manufacturer: swiing® revival parts · Surface: galvanized (blue) · Drive: Hexagon socket · Screw head: Cylinder head · Thread length: 25 mm · Thread length: 35 mm · Thread type: M4x0.7 (standard thread) · Shank: No · Shank: Yes · Number of components: 6 pcs
EUR 6.05
Collection only possible with online purchase and appointment.
