Special exhaust for various Puch mopeds / mopeds which are equipped with a racing cylinder. The racing silencer fits cylinders with a narrow outlet.
This racing exhaust impresses with its solid construction and high-quality workmanship. The silencer is lined with stainless sheet steel (chrome steel).
Ideally, the tuning muffler should be used in conjunction with cylinder kits from 46 mm to exploit the full power.
Due to the huge resonance body, this racing muffler gives your moped a brute increase in power in the middle and upper speed range.
Mounting aids and other add-on parts can be found in the accessories section.
Handmade quality product from the manufacturer MLM.
| Manufacturer | MLM |
| Material | Steel |
| Color | black |
| Mounting type | Welded lug |
| Exhaust type | Cone / double cone |
| Flame tube attachment | Flange |
| Number of fixing points | 1 pcs |
| Puch | E50 |
Accessories & related products
Metrakit 47 mm cylinder kit 75 ccm
Surface: varnished · Nominal diameter: 47 mm · Manufacturer: Metracite · Camouflaged: No · Material: Gray cast iron · Displacement: 75 ccm · Area of application: Tuning · Crankshaft stroke: 43 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Ø piston pin (B): 12 mm · Outlet type: slanted · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs
EUR 416.60
Not in stock
Airsal 47 mm cylinder kit angled exhaust | Puch
Manufacturer: Airsal · Camouflaged: No · Material: Aluminum · Surface: sandblasted · Displacement: 75 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 47 mm · Number of fixing points: 4 pcs · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Ø piston pin (B): 12 mm · Outlet type: slanted · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Area of application: Tuning · Hole spacing inlet: 38 mm
EUR 208.20
Gilardoni italkit 47 mm cylinder kit without cylinder head | Puch
Surface: sandblasted · Nominal diameter: 47 mm · Manufacturer: Gilardoni italkit · Camouflaged: No · Material: Aluminum · Displacement: 75 ccm · Area of application: Tuning · Crankshaft stroke: 43 mm · Ø cylinder neck: 51 mm · Ø outlet inside: 26.5 mm · Ø Inlet inside: 18.3 mm · Hole spacing inlet: 35.5 mm · Hole spacing inlet: 60 mm · Inlet window: 38.5 x 25.8 · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Ø piston pin (B): 12 mm · Outlet type: slanted · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Decompressor: No · Number of fixing points: 4 pcs
EUR 257.30
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Area of application: Tuning · Place of use: Exhaust · Reinforced: No · Ø inside: 27.4 mm · Ø outlet inside: 28 mm · Thickness: 3 mm · Hole spacing outlet: 42.5 mm · Ø screw holder: 6.6 mm
EUR 9.05
Moped fans also bought
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
EUR 12.10
EUR 26.89/l
Simonini carbon exhaust | Puch
Manufacturer: Simonini · Material: Steel · Surface: varnished · Ø outside: 90 mm · Total length: 875 mm · Mounting type: Welded lug · Ø Silencer: 60 mm · Number of fixing points: 1 pcs · Ø Flame tube outside: 30 mm · Exhaust type: Cone / double cone · Ø Internal connection: 24 mm · Flame tube attachment: Flange
EUR 269.50
Not in stock
Cable set cut with adjusting screws | Puch Maxi
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Brass · Material: Steel · Color: black · Quantity: 4 pcs · Outer shell length: 1120 mm · Outer shell length: 1150 mm · Total length: 1200 mm · Total length: 1250 mm · Total length: 1450 mm · Outer shell length: 1740 mm · Total length: 1830 mm
EUR 42.80
DMP intake rubber Ø 33.5 / 33.5 x 31.5 with clamps
Manufacturer: DMP · Material: Rubber · Overall length (A): 31.3 mm · Ø Passage (B): 30.7 mm · Color: black · Ø inside (C): 33.5 mm · Ø inside 2 (D): 33.5 mm · Ø outside (E): 46.5 mm · Ø outside 2 (F): 46.5 mm · Ø External connection (G): 46.5 mm · Ø External connection 2 (H): 46.5 mm · Ø Clamping (I): 32.5 mm · Ø Clamping 2 (K): 32.5 mm
EUR 15.80
Rear fender blank | Puch Maxi S, Supermaxi LG1 / LG2
Surface: blank / oiled · Material: Steel · Folding the ends: not folded · Folding the ends: open folded · Wheel size [inch]: 17 " · Shape of the mudguard: angular · Color: silver · Mounting type: Weld · Total length over ends: 420 mm · Scope: 480 mm · Wide mudguard profile: 73 mm · Wide mudguard profile: 75 mm · Height of mudguard profile: 30 mm · Height of mudguard profile: 60 mm · Total height from support surface to top edge: 110 mm
EUR 36.70
Collection only possible with online purchase and appointment.
