Chrome-plated, adjustable dampers for your moped, moped and small motorcycle.
The hardness or preload of the dampers can be adjusted in five stages thanks to the special spring mount.
Length (mount - mount): 360 mm
Outer diameter of coil spring: 46 mm
Holt diameter: 24 mm
Bush diameter for mounting: 10 / 8 mm
The diameter can be shortened from 10 mm to 8 mm at the mounting points using the plastic bushes supplied.
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery includes one pair.
Rear springs in other colors, the matching adjustment key, washers and fastening material can be found in the accessories section.
Suspension strut from the MKX-SHOCK brand.
| Ø outside | 46 mm |
| Manufacturer | MKX |
| Surface | chrome-plated |
| Color | Chrome |
| Damping type | Spring |
| Ø Fastening inside | 8 mm, 10 mm |
| Mounting type | Nuts & bolts |
| Ø spars | 24 mm |
| Adjustable | Yes |
| Number of fixing points | 2 pcs |
| Hole spacing | 360 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Area of application: Chemistry · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.80
EUR 2’680.00/l
Moped fans also bought
swiing® revival nozzle set M3.5 (44 - 54) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Quantity: 6 pcs · Component group Carburetor: Spraying · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 44 · Nozzle size: 46 · Nozzle size: 48 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 54 · Total length: 6 mm
EUR 19.50
Handlebar fork plate 30 cm curved with chrome strut
Manufacturer: Made in Germany · Material: Steel · Surface: chrome-plated · Color: Chrome · Fork plate holder length: 90 mm · Clamping diameter: 22 mm · Ø outside: 22 mm · Length handlebar ends: 155 mm · Height: 270 mm · Crossbar: Yes · Mounting type: Fork plate · Ø inside (C): 14 mm · Total length over ends: 280 mm · Width: 680 mm
EUR 40.30
Transval speedometer drive 17" with grease nipple
Manufacturer: Transval · Material: Aluminum · Place of use: left · Place of use: right · Ø axle: 11 mm · Color: gray · Thread type: MF10x1 (fine pitch thread) · 4-edge speedometer cable: 1.8 mm · Ø mounting hole: 11 mm · Overall width outside: 60 mm · Ø outside: 41 mm · Wheel size [inch]: 17 " · Total height: 52 mm
EUR 36.70
Cut cable set Black | Sachs Automatic
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Cylinder · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Color: black · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Total length: 1600 mm · Total length: 1650 mm · Total length: 1850 mm · Total length: 2200 mm
EUR 26.80
Magura cable clamp Ø 6 x 9
Manufacturer: Magura · Material: Chrome steel (known as Nirosta®) · Material: Steel · Surface: blank · Surface: galvanized (blue) · Number of components: 1 pcs · Ø outside: 6 mm · Total length: 9 mm · Ø Cable bushing: 2.5 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Thread type: M4x0.7 (standard thread) · Width across flats SW: 6 mm · Thread length: 5 mm · Area of application: Standard
EUR 2.45
Collection only possible with online purchase and appointment.
