Chrome-plated, adjustable dampers for your moped, moped and small motorcycle.
The hardness or preload of the dampers can be adjusted in five stages thanks to the special spring mount.
Length (mount - mount): 340 mm
Outer diameter of coil spring: 46 mm
Holt diameter: 24 mm
Bush diameter for mounting: 10 / 8 mm
With the plastic bushes supplied, the diameter at the mounting points can be shortened from 10 mm to 8 mm.
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery includes one pair.
Rear springs in other colors, the matching adjustment key, washers and fastening material can be found in the accessories section.
Suspension strut from the MKX-SHOCK brand.
| Surface | chrome-plated |
| Manufacturer | MKX |
| Color | Chrome |
| Damping type | Spring |
| Mounting type | Nuts & bolts |
| Adjustable | Yes |
| Ø outside | 46 mm |
| Ø Fastening inside | 8 mm, 10 mm |
| Ø spars | 24 mm |
| Hole spacing | 340 mm |
| Number of fixing points | 2 pcs |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 27.10
EUR 2’710.00/l
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Number of components: 17 pcs · Drive: External hexagon · Screw head: Hexagon · Thread type: M8x1.25 (standard thread)
EUR 22.20
MKX shock absorber 34 cm black
Manufacturer: MKX · Surface: varnished · Color: black · Damping type: Spring · Adjustable: Yes · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø outside: 46 mm · Ø spars: 24 mm · Number of fixing points: 2 pcs · Mounting type: Nuts & bolts · Hole spacing: 340 mm
EUR 61.80
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain type: 415H · Ø Pin: 3.94 mm · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Number of chain links: 128 pcs · Chain pitch: 1/2" x 3/16" · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø bore: 4 mm · Color: gray
EUR 15.50
Not so nice 
Chrome luggage rack | Puch Maxi S
Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Nuts & bolts · Wheel size: 17 " · Total length: 425 mm · Width: 168 mm · Number of fixing points: 4 pcs · Height: 32.5 mm · Ø mounting hole: 8.3 mm · Ø mounting hole: 9 mm · Hole spacing: 29 mm
EUR 24.70
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Total length: 6 mm · Thread length: 4 mm · Ø outside: 5 mm · Number of components: 2 pcs
EUR 2.45
Fortune / Merrick 2.00-2.50 x 16" / 17" inner tube
Manufacturer: Fortune · Tire width: 2 - 2.5 " · Tire width: 2.25 - 2.5 " · Tire width: 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width: 2 " · Width: 2 1/4 " · Width: 2 1/2 " · Tire height [%]: 100 · Wheel size: 16 - 17 " · Wheel size: 17 " · Old designation: 20 x 2 " · Old designation: 20 x 2.25 " · Old designation: 20 x 2.5 " · Old designation: 21 x 2 " · Old designation: 21 x 2.25 " · Old designation: 21 x 2.5 " · Valve type: TR4 Auto valve
EUR 12.30
Transval speedometer drive 17" with grease nipple
Ø mounting hole: 11 mm · Manufacturer: Transval · Place of use: left · Place of use: right · Color: gray · Material: Aluminum · 4-edge speedometer cable: 1.8 mm · Overall width outside: 60 mm · Ø axle: 11 mm · Thread type: MF10x1 (fine pitch thread) · Wheel size: 17 " · Total height: 52 mm · Ø outside: 41 mm
EUR 37.10
Collection only possible with online purchase and appointment.
