High-quality, simple number plate holder made of black plastic with «mofakult» imprint for your moped / moped.
The number holder is attached to the rear mudguard or the side number holder. There are seven attachment points available for this purpose. If new holes need to be drilled into the mudguard, marking them in advance makes it easier to position them optimally.
After the license plate holder has been attached, the number plate is then fastened with two M5 screws. Extra threaded holes have been embedded in the plastic for this purpose. The use of spring washers is recommended to secure the number plate.
You can find the corresponding screws for the number frame in the accessories section.
Merchandise product of the Swiss quality brand mofakult Merch.
Details
| Manufacturer | mofakult Merch |
| Material | Plastic |
| Ø mounting hole | 6 mm |
| Total length | 175 mm |
| Mounting type | Nuts & bolts |
| Width | 108 mm |
| Thread length | 6 mm |
| Height | 11 mm |
| Hole spacing | 50 mm |
| Color | black |
| Number of fixing points | 9 pcs, 2 pcs |
| Thread type | M5x0.8 (standard thread) |
Accessories & related products
Plastic license plate holder
Manufacturer: Made in Switzerland · Material: Brass · Material: Plastic · Total length: 175 mm · Mounting type: Nuts & bolts · Width: 108 mm · Height: 11 mm · Number of fixing points: 9 pcs · Thread type: M5x0.8 (standard thread) · Hole spacing: 50 mm · Color: black · Ø mounting hole: 6 mm · Thread length: 6 mm
EUR 9.70
Serrated lock washer M4 - M12 galvanized
Material: Steel · Surface: galvanized (blue) · Ø inside: 4.5 mm · Ø inside: 5.5 mm · Ø inside: 6.35 mm · Ø inside: 7.4 mm · Ø inside: 10.8 mm · Ø inside: 12.8 mm · Thread size: M10 · Thread size: M12 · Thread size: M4 · Thread size: M5 · Thread size: M6 · Thread size: M7 · Thread size: M8
EUR 0.40
M6x22 hexagon head screw, galvanized
Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Thread type: M6x1 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 10 mm · Total length: 26 mm · Thread length: 22 mm · Strength class: 8.8 · Color: silver · Number of components: 1 pcs
EUR 1.35
Screw M5x10 pan-head hexagon socket, galvanized
Material: Steel · Surface: galvanized (blue) · Thread type: M5x0.8 (standard thread) · Drive: Hexagon socket · Screw head: Lens head · Ø External head: 9.5 mm · Width across flats SW: 3 mm · Shank: No · Total length: 13 mm · Thread length: 10 mm · Strength class: 10.9
EUR 1.10
Moped fans like you also bought:
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Total length: 6 mm · Ø outside: 5 mm · Thread length: 4 mm
EUR 2.45
Continental 2.00 - 2.50 x 16" tube
Manufacturer: Continental · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Tire height [%]: 100 · Wheel size [inch]: 16 " · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Valve type: TR6 car valve
EUR 17.80
Stand 14 mm axle (1A quality) | Piaggio Ciao PX, C24
Surface: varnished · Manufacturer: Made in Italy · Material: Steel · Stand base - center mount (A): 232 mm · Total width of stand base (B): 200 mm · Wide receptacle (C): 78 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm · Color: black · Total height: 250 mm
EUR 36.70
Headlight black | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Tension: 6 V · Tension: 12 V · Housing material: Plastic · Bulb holder: P26s · Lens material: Plastic · Width: 125 mm · Height: 90 mm · Test mark: none · Ø External connection: 6.3 mm · Speedometer recording: 48 mm · Area of application: Original · Area of application: Standard · Switch included: Yes · Color: black · Battery operated: No · Depth: 147 mm · Number of fixing points: 2 pcs · Mounting type: Screws · Piaggio OEM number: 584240
EUR 46.50
Tail light black | Piaggio Ciao PX, C24, Bravo
Manufacturer: Made in Italy · Material: Plastic · Bulb holder: BA9s · Width: 130 mm · Height: 58 mm · Test mark: none · Color: black · Color: red · Brake light: No · Battery operated: No · Reflectors: Yes · Depth: 43 mm · Number of fixing points: 2 pcs · Mounting type: Nuts & bolts
EUR 23.20
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm · Color: black
EUR 24.40
Collection only possible with online purchase and appointment.
