38.30 mm oversize piston with two 2 mm rectangular piston rings with flank lock (FS) for use in Meteor cast iron cylinders to fit your Sachs 502, 50/2, 503 2AL, AAL, 2BL, ABL CH moped / moped.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out about the piston rings used, their stems and locking types on the legend in the pictures.
This special piston has a molybdenum coating. In combination with oil, this results in a technologically high-quality wear protection with excellent sliding properties.
Used for cylinders subject to heavy loads (racing cylinders / Raching cylinders).
Attention: We recommend a running clearance of 0.06-0.07 mm for these pistons, the cylinder should therefore be honed to 38.31 mm.
The piston kit contains piston pins, piston clips and piston rings.
You will find the corresponding assembly tool, piston pin locks and, if necessary, the corresponding cylinder in the accessories section.
Original spare part number: A2773
Quality product from the Italian manufacturer Meteor.
| Manufacturer | Meteor Racing |
| Surface | molybdenum-coated |
| Nominal diameter | 38 mm |
| Ø outside piston (A) | 38.25 mm |
| Ø piston pin (B) | 12 mm |
| Compression height (C) | 28 mm |
| Curvature (D) | 3 mm |
| Total piston height (E) | 53 mm |
| Number of piston rings (F) | 2 pcs |
| Piston ring mold | Rectangular ring |
| Piston ring impact | Flank safety device (FS) |
| Piston ring height | 2 mm |
| Piston weight | 82 g |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 503 - AAL, ABL, 2AL / 2BL |
Accessories & related products
GPO piston pin extractor Ø 10, 12, 14 mm
Surface: burnished · Manufacturer: GPO · Material: Steel · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Area of application: (Dis)assembly tool · Number of components: 7 pcs · Total length: 130 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm
EUR 24.40
Meteor piston rings 38 x 2 mm (FS) (pair) | Sachs 50/2, 503
Nominal diameter: 38 mm · Manufacturer: Meteor · Diameter: 38 mm · Height: 2 mm · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Thick piston ring: 1.6 mm · Pony OEM number: A1091 · Sachs OEM no.: 0215 009 000
EUR 13.40
Moped fans also bought
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Height: 5.3 mm · Total length: 145 mm · Color: silver · Thread type: M5x0.8 (standard thread) · Ø mounting hole: 5 mm · Width: 105 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Thread length: 8 mm
EUR 13.40
Hot 
Wippermann drive chain No.18 (double reinforced)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: Wippermann · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø Pin: 4.15 mm · Ø bore: 4.2 mm
EUR 41.60
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Material: Sealing paper · Component group Carburetor: Sealing, revising · Surface: blank · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Thickness: 1.5 mm · Ø inside: 41 mm · Ø outside: 45 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
EUR 3.45
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Area of application: Gearbox lubrication with clutch · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
EUR 12.10
EUR 26.89/l
Meteor piston 39.5 mm oversize | Sachs 50/2 & 503
Nominal diameter: 38 mm · Manufacturer: Meteor · Ø outside piston (A): 39.45 mm · Compression height (C): 28 mm · Curvature (D): 3 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Ø piston pin (B): 12 mm · Piston ring height: 2 mm · Piston weight: 90 g
EUR 61.20
Collection only possible with online purchase and appointment.
