Steel spacer ring for mounting an original KTM SX50 clutch on the crankshaft of single-automatic E50 engines on your Puch Maxi S and N moped / moped.
If the clutch hub or clutch from the accessories is used, this spacer is not required.
Ø inner: 12.55 mm
Ø outer: 20 mm
Thickness: 4.7 mm
Further attachments, springs and tools for the KTM clutch can be found in the accessories section.
| Ø inside | 12.55 mm |
| Ø outside | 20 mm |
| Manufacturer | MBR |
| Material | Steel |
| Surface | galvanized (blue) |
| Nominal diameter inside | 12.5 mm |
| Total length | 4.7 mm |
| Puch | E50 |
Accessories & related products
MBR Clutch KTM SX50 | Puch E50
Manufacturer: MBR · Area of application: High End · Area of application: MX · Area of application: Racing · Material: Steel · Area of application: Tuning · Material addition: Aluminum · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs
EUR 416.60
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Ø outside: 8 mm · Manufacturer: Magura · Thread type: M6x1 (standard thread) · Material: Brass · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Width across flats SW: 7 mm · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Ø Bundle: 6 mm · Total length: 15 mm · Thread length: 7 mm
EUR 3.05
Magura adjusting screw brake long
Manufacturer: Magura · Thread type: MF6x0.75 (fine pitch thread) · Material: Brass · Surface: nickel-plated · Color: silver · Drive: Knurled screw · Ø External head: 9.1 mm · Ø shaft: 6 mm · Shank length: 11 mm · Total length: 47 mm · Total length: 65 mm · Thread length: 24 mm
EUR 4.80
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2200 mm · Nipple length: 10 mm
EUR 2.95
Nut M12x1 x 10 SW19 Wheel nut galvanized
Height: 10 mm · Thread type: MF12x1 (fine pitch thread) · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Width across flats SW: 19 mm · Drive: External hexagon · Thread depth: 10 mm · Strength class: 8
EUR 2.45
Nut M12x1 x 5 SW19 Wheel nut galvanized
Height: 5.8 mm · Thread type: MF12x1 (fine pitch thread) · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.5D · Width across flats SW: 19 mm · Drive: External hexagon · Strength class: 8 · Pony OEM number: A4249 · Sachs OEM no.: 0242 124 000
EUR 2.20
Collection only possible with online purchase and appointment.
