Product description

Clutch springs suitable for the KTM SX50 clutch for Puch Maxi mopeds / mopeds with E50 engine.
Specially developed for racing purposes. Designed for the highest loads.

The set consists of 3 springs and 3 washers.

The clutches engage at approx. 7500 - 9500 rpm, depending on the oil.
In order to change the clutch engagement speed, the enclosed shims can be installed. This increases the clutch engagement speed by approx. 500 rpm.

The springs are made of stainless steel and can withstand temperatures of up to 240 degrees.

You can find more spring strengths in the accessories section.

Product details

Spring design	Pressure spring
Manufacturer	MBR
Number of components	6 pcs
Area of application	Racing

Suitable for the following models

Puch

E50

Accessories & related products

MBR spur gear 94 teeth "Racing" straight | Puch E50

For: Puch

21491

MBR spur gear 94 teeth "Racing" straight | Puch E50

Material: Steel · Surface: hardened & ground · Manufacturer: MBR · Ø outside: 145 mm · Ø axle: 17 mm · Number of teeth: 94 pcs · Toothing type: straight toothed · Recording type: Interlocking

EUR 245.10

MBR holding tool KTM SX50 clutch Puch E50

For: Puch

21495

MBR holding tool KTM SX50 clutch Puch E50

Material: Steel · Thickness: 5 mm · Manufacturer: MBR · Area of application: Special tool

EUR 42.80

For: Puch

21498

MBR Clutch KTM SX50 | Puch E50

Material: Steel · Manufacturer: MBR · Material addition: Aluminum · Recording type: Cone mounting · Number of jaws: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning · Number of springs: 3 pcs

EUR 416.70

MBR clutch springs soft KTM SX50 clutch | Puch E50

For: Puch

21499

MBR clutch springs soft KTM SX50 clutch | Puch E50

Spring design: Pressure spring · Material: Spring steel · Color: white · Manufacturer: MBR · Number of components: 6 pcs · Area of application: Racing

EUR 29.30

MBR clutch springs medium KTM SX50 clutch | Puch E50

For: Puch

21505

MBR clutch springs medium KTM SX50 clutch | Puch E50

Spring design: Pressure spring · Material: Spring steel · Color: black · Manufacturer: MBR · Number of components: 6 pcs · Area of application: Racing

EUR 28.10

MBR clutch springs hard KTM SX50 clutch | Puch E50

For: Puch

21506

MBR clutch springs hard KTM SX50 clutch | Puch E50

Spring design: Pressure spring · Material: Spring steel · Color: red · Manufacturer: MBR · Number of components: 6 pcs · Area of application: Racing

EUR 30.50

Moped fans also bought

swiing® revival cable guide mudguard black | Puch

For: Puch

10029

swiing® revival cable guide mudguard black | Puch

Height: 12.5 mm · Manufacturer: swiing® revival parts · Total length: 74 mm · Mounting type: Plug connection · Number of fixing points: 2 pcs · Hole spacing: 63 mm · Material: Plastic · Color: black

EUR 4.80

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo · Tomos · Bye Bike · Alpa Chopper / Turbo · Cilo

10040

KMC drive chain 415H (reinforced) 128L

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø bore: 4 mm · Ø Pin: 3.94 mm

EUR 15.30

Inox

Universal

10041

GPO license plate holder Inox (CH version)

Width: 105 mm · Height: 5.3 mm · Manufacturer: GPO · Total length: 145 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 30 mm · Hole spacing: 50 mm · Material: Chrome steel (known as Nirosta®) · Color: silver · Ø mounting hole: 5 mm · Thread type: M5x0.8 (standard thread) · Thread length: 8 mm

EUR 13.40

Universal

10054

Chrome mirror

Material: Steel · Surface: chrome-plated · Color: Chrome · Ø mirror surface: 96 mm · Ø mirror rod: 7 mm · Clamping diameter: 22 mm · Mirror rod length: 230 mm · Total length: 285 mm · Thread type: M8x1.25 (standard thread) · Thread size: M8

EUR 17.00

Not so nice

Main stand black (budget) | Puch Maxi S, P1 / X30 NS, NL, NG

For: Puch

10074

Main stand black (budget) | Puch Maxi S, P1 / X30 NS, NL, NG

Material: Steel · Surface: varnished · Color: black · Stand base - center mount (A): 207 mm · Total width of stand base (B): 217 mm · Wide receptacle (C): 66 mm · Ø Receptacle (D): 18 mm · Spring nipple distance - center pivot axis (E): 75 mm · Total height: 220 mm · Wide upright foot (F): 20 mm · Wide upright foot (F): 50 mm

EUR 24.40

For: Puch

10082

Clutch lever | Puch E50

Area of application: Standard

EUR 17.00

For: Puch

21505

MBR clutch springs medium KTM SX50 clutch | Puch E50

Spring design: Pressure spring · Material: Spring steel · Color: black · Manufacturer: MBR · Number of components: 6 pcs · Area of application: Racing

EUR 28.10

For: Puch

21506

MBR clutch springs hard KTM SX50 clutch | Puch E50

Spring design: Pressure spring · Material: Spring steel · Color: red · Manufacturer: MBR · Number of components: 6 pcs · Area of application: Racing

EUR 30.50

swiing® ingenious bottom bracket bushing brass | Puch Maxi, X30 Sport, Velux, NG-2AH

For: Puch

23462

swiing® ingenious bottom bracket bushing brass | Puch Maxi, X30 Sport, Velux, NG-2AH

Bearing type: Plain bearing · Manufacturer: swiing® ingenious parts · Total length: 19 mm · Material: Brass · Surface: blank · Color: bronze · Ø inside: 16.1 mm · Ø outside: 20 mm · Ø Bundle: 23.9 mm · Puch OEM number: 349.1.42.005.1

EUR 12.10

Inox

Universal

28540

Screw M5x16 countersunk head Inox

Drive: Slot · Total length: 16 mm · Material: Chrome steel (known as Nirosta®) · Screw head: Countersunk head · Thread type: M5x0.8 (standard thread)

EUR 1.10

Collection only possible with online purchase and appointment.

MBR clutch springs extra hard KTM SX50 clutch | Puch E50