Technical data sheet DE
Attention:
Loctite 270 is an oil- and waterproof high-strength screw connection, suitable for all metal threaded connections subject to high vibration and impact loads. Also for passive materials such as aluminium, stainless and galvanized steel. Prevents loosening due to vibration on stud bolts, gears, motors, etc. The connections can be dismantled with normal tools. However, it is recommended to heat the connection beforehand.
Strength: High strength
Functional strength (at room temperature on steel): 6 hours
Loosening torque: 38 Nm
Thread sizes up to M20 T
Temperature resistance: up to 150 °C
Original Loctite product from the German manufacturer Henkel.
| Manufacturer | Loctite |
| Material to be used | Aluminum, Steel |
| Area of application | Chemistry |
| Color | green |
| Contents | 10 ml |
| Hazard warning | Causes skin irritation, May cause allergic skin reactions, Causes serious eye irritation, May irritate the respiratory tract, Toxic to aquatic organisms (with long-term effects) |
| Adhesion | high-strength |
| Gap dimension (max.) | 0.01 mm |
| Temperature resistance (min.) | -55 - 180 °C |
| Type of application | 1K |
| Alignment time | 600 sec |
| Breakaway torque (according to material) | 5 N/m, 31 N/m, 33 N/m |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 27.00
EUR 2’700.00/l
Loctite 638 Joining shaft-hub high-strength 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents: 10 ml · Color: green · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Danger · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Adhesion: high-strength · Temperature resistance (min.): -75 - 150 °C · Gap dimension (max.): 0.25 mm · Type of application: 1K · Alignment time: 300 sec · Breakaway torque (according to material): 23 N/m · Breakaway torque (according to material): 25 N/m · Breakaway torque (according to material): 57 N/m
EUR 27.00
EUR 2’700.00/l
Loctite 638 Joining shaft-hub high-strength 50 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents: 50 ml · Color: green · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Adhesion: high-strength · Temperature resistance (min.): -75 - 150 °C · Gap dimension (max.): 0.25 mm · Type of application: 1K · Alignment time: 300 sec · Breakaway torque (according to material): 23 N/m · Breakaway torque (according to material): 25 N/m · Breakaway torque (according to material): 57 N/m
EUR 83.60
EUR 1’672.00/l
Loctite 222 Low-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Steel · Area of application: Chemistry · Contents: 10 ml · Color: violet · Hazard warning: Causes serious eye irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Adhesion: low strength · Temperature resistance (min.): -55 - 150 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 1200 sec · Breakaway torque (according to material): 6 N/m · Breakaway torque (according to material): 14 N/m
EUR 27.00
EUR 2’700.00/l
Loctite 242 medium-strength threadlocker 50 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Steel · Area of application: Chemistry · Contents: 50 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: May irritate the respiratory tract · Hazard pictogram: GHS07 - Caution dangerous · Adhesion: medium strength · Temperature resistance (min.): 0 - 150 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 300 sec · Breakaway torque (according to material): 7.9 N/m · Breakaway torque (according to material): 17 N/m
EUR 89.70
EUR 1’794.00/l
Loctite 278 High-strength threadlocker 50 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Steel · Area of application: Chemistry · Contents: 50 ml · Color: green · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Danger · Adhesion: medium strength · Temperature resistance (min.): -55 - 200 °C · Gap dimension (max.): 0.25 mm · Type of application: 1K · Alignment time: 1200 sec · Breakaway torque (according to material): 42 N/m
EUR 89.70
EUR 1’794.00/l
Explore categories from Screws & fastener sets
Moped fans also bought
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Nipple length: 5 mm · Area of application: Standard
EUR 2.95
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø outside: 5 mm · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Total length: 6 mm · Drive: Slot · Thread length: 4 mm
EUR 2.45
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 27.00
EUR 2’700.00/l
Loctite 638 Joining shaft-hub high-strength 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents: 10 ml · Color: green · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Danger · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Adhesion: high-strength · Temperature resistance (min.): -75 - 150 °C · Gap dimension (max.): 0.25 mm · Type of application: 1K · Alignment time: 300 sec · Breakaway torque (according to material): 23 N/m · Breakaway torque (according to material): 25 N/m · Breakaway torque (according to material): 57 N/m
EUR 27.00
EUR 2’700.00/l
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Width: 50 mm · Choke control: Hand choke · Height: 95 mm · Total length: 66 mm · Ø Inside entrance: 15 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Area of application: Tuning · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 98.30
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
