Complete LELEU spoke wheel hub with brake anchor plate and axle for your Puch Maxi N chopper as well as X30 chopper moped / moped with 14" rim.
The brake anchor plate was manufactured in a small series with the old casting tools and therefore corresponds to the original from the past.
The wheel hub comes from new production, is precisely manufactured and impresses with its high-quality workmanship. The hub is equipped with grooved ball bearings and an M11 axle.
The 28 spoke holes with a diameter of 3.7 mm are also suitable for 2.9 mm stainless steel spokes.
Note: Unfortunately, the brake pads are something that didn't convince us. We recommend replacing these with a high-quality alternative such as those in the accessories section.
| Manufacturer | LELEU |
| Material | Aluminum |
| Axle length | 160 mm |
| Ø drum | 80 mm |
| Thread type | MF10x1 (fine pitch thread) |
| Ø axle | 11 mm |
| Ø bolt circle | 105 mm |
| Ø inside | 80 mm |
| Ø outside | 115 mm |
| Area of application | Original |
| Number of spoke holes | 28 pcs |
| Ø spoke hole | 3.7 mm |
| Puch |
Ratings
Accessories & related products
swiing® ingenious assembly tool clasp brake shoe
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Total length: 41.1 - 65 mm · Ø outside: 10 mm · Thread length: 30 mm · Area of application: Special tool · Width across flats: 8 mm · Number of components: 3 pcs
EUR 20.40
Hot 
LELEU wheel hub spoke wheel front 36 holes with anchor plate & axle | Puch
Manufacturer: LELEU · Material: Aluminum · Axle length: 160 mm · Thread type: MF11x1 (fine pitch thread) · Ø outside: 115 mm · Ø axle: 11 mm · Ø drum: 80 mm · Number of spoke holes: 36 pcs · Ø spoke hole: 3.7 mm · Area of application: Original
EUR 198.10
Rear wheel hub spoke 36 holes with axle (1A quality) | Puch Maxi, X30 NG-2AH
Material: Aluminum · Thread type: FG34.8 (1.37" 24G) · Thread type: M5x0.8 (standard thread) · Thread type: MF12x1 (fine pitch thread) · Ø drum: 80 mm · Ø axle: 12 mm · Ø bolt circle: 105.5 mm · Total length: 185 mm · Thread length: 12 mm · Thread length: 17 mm · Thread length: 43 mm · Ø outside: 115 mm · Area of application: Standard · Color: silver · Width: 105 mm · Number of fixing points: 6 pcs · Number of spoke holes: 36 pcs · Ø spoke hole: 3.7 mm · Puch OEM number: 349.5.41.803.1
EUR 117.60
Moped fans also bought
Side stand chrome | Puch
Material: Steel · Color: Chrome · Color: black · Total length: 345 mm · Number of fixing points: 2 pcs · Manufacturer: Made in Portugal · Surface: chrome-plated · Surface: powder-coated · Adjustable: Yes · Length pivot point - floor: 220 mm · Mounting type: Screwed clamp
EUR 24.20
GPO 19" spoke set incl. nipple (2.9 x 212 mm) Inox
Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Nipple length: 14 mm · Manufacturer: GPO · Surface: raw · Quantity: 36 pcs · Length from hook: 212 mm · Ø spoke head: 5.35 mm · Thread length: 11 mm · Ø spoke: 2.9 mm · Nominal diameter (thread): 3.15 mm · Ø nipple head: 8.1 mm · Ø Nipple neck: 5 mm · Hook length: 9.8 mm · Hook angle: 95 °
EUR 74.20
swiing® revival swabs short Bing SRE, SSN, SSE, SRF, 85, SRA
Manufacturer: swiing® revival parts · Component group Carburetor: Adjusting screws, float, etc. · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: SSE · Carburetor type: SSN · Carburetor type: 85 · Total length: 25 mm · Ø inside: 2.5 mm · Ø outside: 8 mm · Pony OEM number: A2430 · Sachs OEM no.: 0281 109 000
EUR 4.85
Speedo drive 19" right | Puch Velux
Ø mounting hole: 10 mm · Color: gray · Manufacturer: Made in Germany · Ø outside: 41 mm · Material: Aluminum · Place of use: right · Thread type: MF10x1 (fine pitch thread) · 4-edge speedometer cable: 2.6 mm · Overall width outside: 50 mm · Ø axle: 10 mm · Wheel size: 19 " · Total height: 48 mm
EUR 55.60
Collection only possible with online purchase and appointment.
