Sealing washer 5 x 10 x 2 mm for the carburetor flange of Bing SSB carburetors, which are installed on Sachs 502, 50/2, 50/3, 50/4 mopeds / mopeds.
The washer acts as an insulating washer to keep heat away from the carburetor and also as an additional sealing washer.
The aluminium washer has an EPDM rubber ring vulcanized onto it. This fits perfectly against the sealing surface and encases the stud bolt.
Ø inner: 4.6 - 5.7 mm
Ø outer: 10 mm
Height: 2.9 mm
Material: aluminum & EPDM rubber
Price per piece.
Original Sachs spare part number: A1829
| Material | Aluminum, EPDM - Rubber |
| Nominal diameter inside | 5 mm |
| Nominal diameter (thread) | 5 mm |
| Pony OEM number | A1829 |
| Sachs OEM no. | 0250 089 000 |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL , AML 50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS) , LKH (4.5 PS) |
Accessories & related products
Cap nut M5 Inox
Thread type: M10x1.5 (standard thread) · Thread type: M4x0.7 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M7x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Nut type: Cap nut · Material: Chrome steel (colloquially known as stainless steel) · Nominal diameter (thread): 4 mm · Nominal diameter (thread): 5 mm · Nominal diameter (thread): 6 mm · Nominal diameter (thread): 7 mm · Nominal diameter (thread): 8 mm · Nominal diameter (thread): 10 mm · Drive: External hexagon
EUR 1.00
Serrated lock washer M5 galvanized
Surface: galvanized (blue) · Thread size: M10 · Thread size: M12 · Thread size: M4 · Thread size: M5 · Thread size: M6 · Thread size: M7 · Thread size: M8 · Material: Steel · Ø inside: 4.5 mm · Ø inside: 5.5 mm · Ø inside: 6.35 mm · Ø inside: 7.4 mm · Ø inside: 10.8 mm · Ø inside: 12.8 mm
EUR 0.40
Hot 
swiing® revival carburetor 13 mm Bing SSB 1/13/4
Nominal diameter: 13 mm · Manufacturer: swiing® revival parts · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SSB · Choke control: without choke · Height: 85 mm · Ø fuel hose connection: 6 mm · Nozzle size: 75 · Hole spacing inlet: 31 mm · Mixed oil connection: No · Width: 87 mm · Mounting type: Flange · Vacuum connection: No · Total length: 132 mm · Area of application: Standard · Area of application: Tuning
EUR 156.20
Explore categories from Screws & fastener sets
Moped fans also bought
M10 sealing ring Fiber
Place of use: Carburetor · Material: Fiber · Place of use: Motor housing · Surface: raw · Ø inside: 10 mm · Thickness: 1.6 mm · Ø outside: 13.8 mm · Area of application: Standard · Pony OEM number: A1817 · Pony OEM number: A5650 · Puch OEM number: 27071 · Sachs OEM no.: 0250 042 001 · Sachs OEM no.: 0650 131 000
EUR 1.95
swiing® revival Stud Bolt M5x23 Inlet (Diaphragm) 10.9 | Sachs 50/2 (A3700)
Manufacturer: swiing® revival parts · Material: Steel · Diameter: 4.9 mm · Surface: galvanized (blue) · Nominal diameter (thread): 5 mm · Thread type: M5x0.8 (standard thread) · Total length: 23 mm · Area of application: Standard · Thread length: 6 mm · Thread length: 12 mm · Pony OEM number: A3700 · Sachs OEM no.: 0640 016 101 · Sachs OEM no.: 0640 016 102
EUR 2.20
swiing® revival gasket 0.4 mm gearbox cover | Sachs 502, 50/2, 50/3, 50/4 (A1827)
Manufacturer: swiing® revival parts · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Total length: 210 mm · Number of fixing points: 5 pcs · Width: 130 mm · Thickness: 0.4 mm · Pony OEM number: A1827 · Sachs OEM no.: 0250 087 100
EUR 7.25
swiing® revival stud bolt set M5x26 inlet (10.9 strength) | Sachs 50/2, 502, 50/3
Manufacturer: swiing® revival parts · Thread type: M5x0.8 (standard thread) · Surface: galvanized (blue) · Material: Steel · Nominal diameter (thread): 5 mm · Drive: External hexagon · Thread length: 7 mm · Thread length: 14 mm · Total length: 26 mm · Width across flats: 8 mm · Strength class: 8 · Strength class: 10.9
EUR 7.00
Working late? Evening hours on Thursday until 20:00
