Black mufflers with chrome-plated cover caps for your moped, moped and small motorcycle.
These mufflers are perfect for the old-school look.
Length (mount - mount): 320 mm
Ø outer cover sleeve: 40 mm
Ø uprights: 29 mm
Ø bushings for mounting: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushings from shifting in the event of lateral forces.
The scope of delivery corresponds to one pair.
Rear springs in other designs, fastening material and washers can be found in the accessories section.
Quality product from the Italian manufacturer IMCA.
Manufacturer | IMCA |
Surface | chrome-plated |
Color | Chrome, black |
Damping type | Pneumatic (air) |
Adjustable | No |
Ø outside | 40 mm |
Ø Fastening inside | 10 mm |
Ø spars | 29 mm |
Mounting type | Nuts & bolts |
Number of fixing points | 2 pcs |
Hole spacing | 320 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Area of application: Chemistry · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Color: blue · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Temperature resistance (min.): -75 - 200 °C · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.90
EUR 2’690.00/l
Shock absorber 36 cm chrome / black with cover cap
Ø outside: 52 mm · Ø outside: 60 mm · Surface: chrome-plated · Damping type: Spring · Adjustable: No · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Number of fixing points: 2 pcs · Ø spars: 30 mm · Hole spacing: 360 mm · Mounting type: Nuts & bolts · Color: Chrome · Color: black
EUR 119.00
MKX shock absorber 28 cm chrome
Ø outside: 46 mm · Manufacturer: MKX · Material: Platinum · Surface: chrome-plated · Damping type: Spring · Adjustable: Yes · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Number of fixing points: 2 pcs · Ø spars: 24 mm · Hole spacing: 280 mm · Mounting type: Nuts & bolts · Color: Chrome
EUR 61.30
Not in stock
Moped fans like you also bought:
Spotlight round Ø 13 cm chrome / black
Material: Sheet metal (steel) · Surface: chrome-plated · Surface: varnished · Color: Chrome · Housing material: Metal · Color: black · Color: transparent · Lens material: Plastic · Ø outside: 130 mm · Bulb holder: BA15d · Width: 134 mm · Speedometer recording: None · Mounting type: Screws · Test mark: none · Switch included: No · Number of fixing points: 2 pcs · Height: 147 mm · Battery operated: No · Depth: 80 mm · Thread size: M6 · Area of application: Standard
EUR 30.60
Mudguard strut 17" chrome
Manufacturer: Made in Italy · Material: Steel · Surface: chrome-plated · Wheel size [inch]: 17 " · Distance mudguard - center hole: 315 mm · Total length: 325 mm · Number of fixing points: 5 pcs · Ø mounting hole: 5.5 mm · Ø mounting hole: 10.8 mm · Color: Chrome · Hole spacing: 19 mm · Mounting type: Nuts & bolts · Wide intake: 65 mm
EUR 15.80