Black, adjustable shock absorbers for your moped, moped and small motorcycle.
The hardness or preload of the shock absorbers can be adjusted using the special spring mount.
Length (mount - mount): 320 mm
Ø outer coil spring: 44 mm
Ø spars: 28 mm
Ø bushings for fastening: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushings from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
Quality product from the Italian manufacturer IMCA.
| Manufacturer | IMCA |
| Material | Steel |
| Surface | varnished |
| Damping type | Spring |
| Ø outside | 44 mm |
| Adjustable | Yes |
| Color | black |
| Ø Fastening inside | 10 mm |
| Ø spars | 28 mm |
| Hole spacing | 320 mm |
| Mounting type | Nuts & bolts |
| Number of fixing points | 2 pcs |
Ratings
Accessories & related products
IMCA shock absorber 30 cm chrome
Manufacturer: IMCA · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Nuts & bolts · Damping type: Spring · Adjustable: Yes · Ø Fastening inside: 10 mm · Ø outside: 45 mm · Ø spars: 28 mm · Number of fixing points: 2 pcs · Hole spacing: 300 mm
EUR 63.10
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 27.10
EUR 2’710.00/l
YSS shock absorber Racing 30 cm (oil pressure)
Material: Steel · Color: black · Number of fixing points: 2 pcs · Manufacturer: YSS · Surface: varnished · Damping type: Hydraulic (oil) · Adjustable: Yes · Ø outside: 52 mm · Ø Fastening inside: 10 mm · Mounting type: Nuts & bolts · Ø spars: 32 mm · Hole spacing: 330 mm
EUR 173.30
IMCA shock absorber 30 cm chrome / black
Color: Chrome · Color: black · Manufacturer: IMCA · Material: Steel · Surface: chrome-plated · Surface: varnished · Damping type: Spring · Adjustable: Yes · Ø outside: 45 mm · Mounting type: Nuts & bolts · Ø Fastening inside: 10 mm · Ø spars: 28 mm · Number of fixing points: 2 pcs · Hole spacing: 300 mm
EUR 74.20
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Number of components: 17 pcs · Drive: External hexagon · Screw head: Hexagon · Thread type: M8x1.25 (standard thread)
EUR 22.20
Moped fans also bought
Not so nice 
Chrome luggage rack | Puch Maxi S
Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Nuts & bolts · Wheel size: 17 " · Total length: 425 mm · Width: 168 mm · Number of fixing points: 4 pcs · Height: 32.5 mm · Ø mounting hole: 8.3 mm · Ø mounting hole: 9 mm · Hole spacing: 29 mm
EUR 24.70
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Thread type: M5x0.8 (standard thread) · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm · Color: silver · Total length: 47 mm · Total length: 60 mm
EUR 16.00
GPO side bars black matt (1A quality) | Puch Maxi S
Manufacturer: GPO · Material: Steel · Surface: varnished · Color: black · Mounting type: Screws · Total length: 420 mm · Ø outside: 12.5 mm · Width: 170 mm · Number of fixing points: 4 pcs · Height: 35 mm · Ø mounting hole: 8.1 mm · Hole spacing: 410 mm
EUR 37.10
Collection only possible with online purchase and appointment.
