
Black, adjustable dampers for your moped, moped and small motorcycle.
The hardness or preload of the coil springs can be adjusted using the special spring mount.
Length (mount - mount): 280 mm
Ø outer spiral spring: 45 mm
Ø spars: 28 mm
Büchsendurchmesser zur Bef.: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
Quality product from the Italian manufacturer IMCA.
| Manufacturer | IMCA |
| Material | Steel |
| Surface | varnished |
| Color | black |
| Damping type | Spring |
| Ø outside | 45 mm |
| Adjustable | Yes |
| Ø spars | 28 mm |
| Ø Fastening inside | 10 mm |
| Total length | 310 mm |
| Hole spacing | 280 mm |
| Number of fixing points | 2 pcs |
| Mounting type | Nuts & bolts |
| Universal |
| Tomos |
Accessories & related products
IMCA Shock absorber 28 cm chrome
Manufacturer: IMCA · Surface: chrome-plated · Color: Chrome · Damping type: Spring · Adjustable: Yes · Ø outside: 45 mm · Total length: 305 mm · Ø spars: 28 mm · Number of fixing points: 2 pcs · Mounting type: Nuts & bolts · Ø Fastening inside: 10 mm · Hole spacing: 280 mm
EUR 62.70
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Temperature resistance (min.): -75 - 200 °C · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 27.00
EUR 2’700.00/l
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Number of components: 17 pcs · Thread type: M8x1.25 (standard thread) · Screw head: Hexagon · Drive: External hexagon
EUR 22.00
YSS Shock absorber Racing 28 cm (oil pressure)
Manufacturer: YSS · Surface: varnished · Color: black · Damping type: Hydraulic (oil) · Adjustable: Yes · Total length: 310 mm · Ø spars: 280 mm · Number of fixing points: 2 pcs · Mounting type: Nuts & bolts · Ø Fastening inside: 10 mm · Hole spacing: 280 mm
EUR 172.20
Explore categories from Shock absorber & swingarm
Moped fans also bought
Adhesive kit tank & frame black PVC carrier film | Puch Maxi S
Material: Polyvinyl chloride (PVC) · Color: black · Color: white · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Place of use: Frame (+ tank) · Width: 123 mm · Width: 230 mm · Width: 330 mm · Height: 26 mm · Height: 60 mm · Height: 65 mm
EUR 11.60
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Number of components: 2 pcs · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Total length: 6 mm · Thread length: 4 mm · Drive: Slot · Ø outside: 5 mm
EUR 2.45
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Thread type: M5x0.8 (standard thread) · Thread length: 35 mm · Thread length: 50 mm · Drive: Slot · Drive: Triangular head · Total length: 47 mm · Total length: 60 mm
EUR 15.90







