Reinforced pull pin suitable for the manual Z50 engine of Puch X30 Sport NS / NL, as well as Puch X30 Velux mopeds / mopeds.
Design with thrust ball bearing with 60° contact angle and enlarged contact surface on the pivot shaft. In addition, the pull pin is bolted to the bearing and not caulked, which makes it almost impossible to tear out.The reinforced clutch springs in the accessories can be used in conjunction with the clutch bearing without any problems.
Adjusting the clutch is no longer necessary with this version.
Attention: A half-height M10x1 nut must be used to mount the clutch so that the screw connection of the tension bolt cannot touch the nut.
Alternative of the original Puch spare part number: 050.2.1230.0
| Manufacturer | HS-Retro |
| Material | Steel, Aluminum |
| Surface | Hardened, anodized |
| Area of application | Original, High End |
| Color | black |
| Height | 35.2 mm |
| Ø outside | 44.75 mm |
| Alternative version of the Puch OEM number | 050.2.1230.0 |
| Puch | Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 |
Accessories & related products
swiing® revival clutch spring 2-disc version | Puch Z50
Spring design: Pressure spring · Ø wire: 4 mm · Manufacturer: swiing® revival parts · Area of application: Original · Material: Spring steel · Area of application: Standard · Color: gray · Ø inside: 30.5 mm · Total length: 19.5 mm · Ø outside: 39 mm · Number of components: 1 pcs
EUR 22.00
Normio M10x1 Medium-Height Stainless Steel Nut
Manufacturer: Normio · Material: Chrome steel (colloquially known as stainless steel) · Nut type: Hexagon nut · Nominal diameter (thread): 10 mm · Drive: External hexagon · Height: 5 mm · Width across flats: 17 mm · Thread type: MF10x1 (fine pitch thread)
EUR 4.05
swiing® ingenious clutch spring reinforced +20% | Puch Z50
Spring design: Pressure spring · Ø wire: 4.6 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Area of application: Tuning · Color: blue · Ø inside: 30 mm · Ø outside: 39 mm · Total length: 20.5 mm · Number of components: 1 pcs
EUR 29.40
swiing® ingenious clutch spring reinforced +40% | Puch Z50
Spring design: Pressure spring · Ø wire: 4.5 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Area of application: Tuning · Color: red · Number of components: 1 pcs · Ø inside: 30 mm · Ø outside: 39 mm · Total length: 23.5 mm
EUR 29.40
Normio M10 Galvanized Flanged Washer
Ø inside: 4.5 mm · Ø inside: 5.5 mm · Ø inside: 6.35 mm · Ø inside: 7.4 mm · Ø inside: 10.8 mm · Ø inside: 12.8 mm · Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Thread size: M10 · Thread size: M12 · Thread size: M4 · Thread size: M5 · Thread size: M6 · Thread size: M7 · Thread size: M8
EUR 0.40
Explore categories from Clutch
Moped fans also bought
swiing® revival gearbox cover gasket (old model) | Puch Z50 engine
Thickness: 0.35 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Width: 155 mm · Total length: 166 mm · Number of fixing points: 8 pcs · Puch OEM number: 349.1.10.249.1
EUR 4.80
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
EUR 14.20
EUR 31.56/l
Normio M10x1 Medium-Height Stainless Steel Nut
Manufacturer: Normio · Material: Chrome steel (colloquially known as stainless steel) · Nut type: Hexagon nut · Nominal diameter (thread): 10 mm · Drive: External hexagon · Height: 5 mm · Width across flats: 17 mm · Thread type: MF10x1 (fine pitch thread)
EUR 4.05
Surflex clutch plate set | Puch Z50
Manufacturer: Surflex · Material: Composite materials · Area of application: Original · Material: Steel · Ø inside: 46.3 mm · Ø inside: 51.3 mm · Ø outside: 69.6 mm · Ø outside: 74.8 mm · Recording type: Interlocking · Number of slats: 2 pcs · Thickness: 2.75 mm
EUR 43.00
Not in stock
swiing® revival spacer set crankshaft L17 | Puch Z50
Manufacturer: swiing® revival parts · Ø outside: 23.8 mm · Material: Steel · Surface: blank / oiled · Nominal diameter inside: 17 mm · Ø inside: 17.1 mm · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.25 mm · Thickness: 0.3 mm
EUR 10.90
swiing® ingenious clutch spring reinforced +40% | Puch Z50
Spring design: Pressure spring · Ø wire: 4.5 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Area of application: Tuning · Color: red · Number of components: 1 pcs · Ø inside: 30 mm · Ø outside: 39 mm · Total length: 23.5 mm
EUR 29.40
Working late? Evening hours on Thursday until 20:00
