Clutch drum of the Primärantrieb for 2-speed manual Z50 engines of Puch X30 NS, NL mopeds / mopeds.
This clutch basket is used in combination with primary drive sprockets, which have 69 teeth.
Number of teeth: 19
Toothing: helical
Total height: 26.6 mm
Number of plates: Two-plate clutch
Note: There may be a slight singing after installation until the tooth flanks are ground in cleanly on the primary gear.
You can find the sliding blocks, thrust washers and other parts in the accessories section.
Original Puch spare part number: 350.1.12.002.2
| Manufacturer | HS-Retro |
| Material | Steel |
| Toothing type | helical toothed |
| Number of teeth | 19 pcs |
| Ø inside | 17 mm |
| Ø outside | 74.8 mm |
| Height | 26.6 mm |
| Area of application | Original, High End |
| Puch OEM number | 350.1.12.002.2 |
| Puch | Z50 (X30 Sport) Z50 (X30 Velux) |
Accessories & related products
Normio M10x1 Medium-Height Stainless Steel Nut
Manufacturer: Normio · Material: Chrome steel (colloquially known as stainless steel) · Nut type: Hexagon nut · Width across flats: 17 mm · Height: 5 mm · Nominal diameter (thread): 10 mm · Thread type: MF10x1 (fine pitch thread) · Drive: External hexagon
EUR 4.05
Surflex clutch plate set | Puch Z50
Manufacturer: Surflex · Material: Composite materials · Material: Steel · Thickness: 2.75 mm · Ø inside: 46.3 mm · Ø inside: 51.3 mm · Recording type: Interlocking · Number of slats: 2 pcs · Ø outside: 69.6 mm · Ø outside: 74.8 mm · Area of application: Original
EUR 43.00
Not in stock
Normio M10 Galvanized Flanged Washer
Manufacturer: Normio · Ø inside: 4.5 mm · Ø inside: 5.5 mm · Ø inside: 6.35 mm · Ø inside: 7.4 mm · Ø inside: 10.8 mm · Ø inside: 12.8 mm · Material: Steel · Surface: galvanized (blue) · Thread size: M10 · Thread size: M12 · Thread size: M4 · Thread size: M5 · Thread size: M6 · Thread size: M7 · Thread size: M8
EUR 0.40
Explore categories from Clutch
Moped fans also bought
swiing® revival gasket set Z50 engine | Puch X30 NS / NL
Manufacturer: swiing® revival parts · Number of components: 10 pcs · Material: Sealing paper · Area of application: Standard · Ø outlet inside: 22 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44
EUR 24.50
swiing® revival gearbox cover gasket (old model) | Puch Z50 engine
Width: 155 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Thickness: 0.35 mm · Number of fixing points: 8 pcs · Total length: 166 mm · Puch OEM number: 349.1.10.249.1
EUR 4.80
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift
EUR 14.20
EUR 31.56/l
swiing® ingenious clutch spring reinforced +40% | Puch Z50
Spring design: Pressure spring · Manufacturer: swiing® ingenious parts · Ø inside: 30 mm · Ø outside: 39 mm · Number of components: 1 pcs · Material: Spring steel · Area of application: Tuning · Color: red · Surface: coated · Ø wire: 4.5 mm · Total length: 23.5 mm
EUR 29.40
Working late? Evening hours on Thursday until 20:00
