Special CDI ignition box suitable for all HPI ignitions on your moped, moped and small motorcycle.
The ignition box has two additional cables with different ignition curves for the corresponding speed range.
The desired ignition curve is activated by connecting the corresponding cable. The two curves are not used for speed throttling, but are designed for different loads in the racing area.
To simplify matters, a switch can be connected. This makes it easy to switch between the two ignition curves at the touch of a button.
You can find the toggle switch, a corresponding ignition and suitable connectors in the accessories section.
Branded product from the manufacturer HPI – Horse Power Ignition.
| Manufacturer | HPI |
| Color | black |
| Ø mounting hole | 6 mm |
| Material | Plastic |
| Area of application | Performance, Racing, High End, Tuning |
| Number of fixing points | 1 pcs |
| Universal | |
| Puch | |
| Sachs | |
| Pony / Cilo (Beta 521 & 512) | |
| Piaggio | |
| Zündapp Belmondo |
Accessories & related products
HPI racing ignition set 12V with light 60W | Puch X30 Velux / Sachs 503 / Zündapp Belmondo
Manufacturer: HPI · Manufacturer: swiing · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Tension: 12 V · Ø cable: 7 mm · Performance: 60 W · Area of application: Tuning
EUR 459.60
Hot 
HPI ignition box programmable (two ignition curves)
Manufacturer: HPI · Ø mounting hole: 7.5 mm · Material: Plastic · Color: red · Total length: 63 mm · Hole spacing: 80 mm · Width: 100 mm · Height: 28 mm · Number of fixing points: 2 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 373.80
Moped fans also bought
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Area of application: Standard · Surface: sandblasted · Ø cylinder: 38 mm · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 40.30
Airsal 38 mm cylinder kit 50 cc camouflaged | Puch Maxi, X30
Nominal diameter: 38 mm · Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 20 mm · Number of fixing points: 4 pcs · Inlet window: 23.5 / 20 x 14.5 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Area of application: Tuning · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Camouflaged: Yes
EUR 122.50
Airsal 44 mm cylinder kit 65 ccm camouflaged | Puch
Nominal diameter: 44 mm · Manufacturer: Airsal · Material: Aluminum · Area of application: Tuning · Surface: sandblasted · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Inlet window: 24 / 20 x 15 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Camouflaged: Yes
EUR 110.20
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 45 mm · Area of application: Tuning · Height: 55 mm · Candle thread: short · Hole pattern [mm]: 44 x 44 · Width: 125 mm · Total length: 135 mm · Decompressor: No · Camouflaged: Yes · Number of fixing points: 4 pcs
EUR 40.30
swiing® revival nut M11x1 x 4 SW19 wheel nut galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon flat nut · Thread type: MF11x1 (fine pitch thread) · Drive: External hexagon · Width across flats SW: 19 mm · Height: 4 mm · Strength class: 8
EUR 3.55
GPO 44 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Area of application: Tuning · Surface: sandblasted · Ø cylinder: 44 mm · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes
EUR 52.60
swiing® ingenious intake manifold Gilardoni italkit Inox
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: No · Ø External connection: 24 mm · Ø inside: 21 mm · Hole pattern [mm]: 60 x 35 · Number of fixing points: 4 pcs · Total length: 80 mm · Height flange center hole: 42.5 mm · Total height: 55 mm · Mounting type: Screws · Area of application: Tuning
EUR 83.20
Not in stock
Collection only possible with online purchase and appointment.
