A rare 43.5 mm aluminum cylinder with cast liners fits various Puch mopeds & mopeds.
The openings of the overflow channels match those of a Puch catalytic converter engine exactly.
Pin spacing intake: 38 mm
Pin spacing exhaust: 42 mm
Exhaust angle: exhaust port
Ø cylinder: 43.5 mm
Outer dimensions of the cooling fins: 175 x 175 mm
The set does not include gaskets, these can be found in the accessories section.
Details
| Material | Gray cast iron, Aluminum |
| Surface | blank |
| Area of application | Tuning |
| Crankshaft stroke | 43 mm |
| Nominal diameter | 43.5 mm |
| Thread inlet | M6x1 (standard thread) |
| Number of fixing points | 4 pcs |
| Ø piston pin (B) | 12 mm |
| Hole spacing outlet | 42 mm |
| Hole spacing inlet | 38 mm |
| Outlet type | slanted |
| Thread outlet | M6x1 (standard thread) |
| Hole pattern [mm] | 44 x 44 |
| Camouflaged | No |
Suitable for the following models
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing type: Needle roller and cage assembly · Bearing cage: Silver cage · Dimension needle bearing: 12/15 x 14.2 · Manufacturer: swiing® ingenious parts · Width: 14.2 mm · Ø outside: 15 mm · Ø inside: 12 mm · Alternative version of the Pony OEM number: A4222 · Alternative version of the Sachs OEM number: 0232 157 001 · Tomos OEM number: 035548
EUR 14.60
Dirko Dichtmasse rot (Silikon) Hochtemperatur 70 ml dauerelastisc
Manufacturer: Elring · Area of application: Chemistry · Color: red · Contents [ml]: 70 ml · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Gap dimension (max.): 2 mm · Temperature resistance (min.): -60 - 300 °C
EUR 28.10
Not in stock
EUR 401.43/l
Moped fans like you also bought:
GPO piston stopper M14x1.25
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Diameter: 12 mm · Diameter: 16 mm · Total length: 83 mm · Width across flats SW: 17 mm · Area of application: Special tool · Number of components: 1 pcs · Thread type: MF14x1.25 (fine pitch thread)
EUR 11.70
swiing® ingenious connecting rod "Racing" | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: ground · Connecting rod length center-center: 90 mm · Total length: 90 mm · Ø piston pin (B): 12 mm · Ø Connecting rod bolt: 16 mm · Ø lower connecting rod eye outside: 28.2 mm · Ø upper connecting rod eye outside: 21.5 mm · Ø lower bearing inside: 21 mm · Ø inside upper bearing: 15 mm · Dimension lower bearing: 16/21 x 9.7 mm · Dimension upper bearing: 12/15 x 14.2 mm · Connecting rod pin length: 34 mm · Thickness: 10 mm · Area of application: Tuning
EUR 60.10
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Temperature resistance (min.): -60 - 315 °C · Manufacturer: Elring · Material: Silicone · Color: gray · Contents [ml]: 70 ml · Area of application: Chemistry · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Gap dimension (max.): 2 mm
EUR 24.40
EUR 348.57/l
Collection only possible with online purchase and appointment.
