Valuable front light with parking light and low beam made of black matt plastic for Piaggio Si mopeds / mopeds.
The light has side tabs for routing the cable harness.
The front light can be fitted with both conventional P26s bulbs and P26s LED bulbs.
A filament bulb with PS26s socket and a 43 mm socket bulb as indicator light are included in the scope of delivery.
All common speedometers with 48 mm diameter can be installed in the front light.
Ø outside: 130 mm
Hole spacing: 115 mm
Tachometer cut-out: 48 mm
Installed low beam bulb: PS26s 12V - 21W
Installed base bulb: 12V - 10W
Mark: E3 S3
Mäsig-läsig! – We strive to offer you the widest range of moped spare parts. However, this product is of rather poor quality and is not recommended by us. Should you nevertheless choose this item, we can understand your decision, but cannot offer you any guarantee or exchange.
The light fulfills its purpose, but the lamp housing is susceptible to scratches and in some cases already shows slight damage from the factory. In addition, the reflector does not make a particularly high-quality impression.
Matching bulbs, lamp grilles and alternative front spotlights can be found in the accessories section.
Original Piaggio spare part number: 228999, 268074
Good-quality reproduction product from the Asian market.
Details
Manufacturer | Quenching |
Material | Plastic |
Tension | 12 V |
Housing material | Plastic |
Color | black, white |
Switch included | Yes |
Bulb holder | P26s, Soffit pear |
Mounting type | Screws |
Performance | 21 W, 10 W |
Test mark | E3 |
Speedometer recording | 48 mm |
Number of fixing points | 2 pcs |
Battery operated | No |
Area of application | Standard |
Ø outside | 130 mm |
Suitable for the following models
Piaggio | Si |
Accessories & related products
Tail light black | Piaggio SI
Manufacturer: Made in Italy · Material: Plastic · Tension: 6 V · Tension: 12 V · Bulb holder: Soffit pear · Mounting type: Nuts & bolts · Test mark: none · Color: black · Color: red · Number of fixing points: 1 pcs · Brake light: No · Battery operated: No · Reflectors: Yes · Depth: 65 mm · Width: 100 mm · Height: 78 mm
EUR 26.20
66HEROES speedometer 60 km/h Ø 48 mm "mofakult" white
Surface: chrome-plated · Manufacturer: 66HEROES · Material: Metal · Material: Plastic · Maximum speed: 60 Km/h · Lighting: without · Ø outside: 52.4 mm · 4-edge speedometer cable: 2 mm · Ø Receptacle: 48 mm · Color: Chrome · Color: black · Color: white · Thread type: MF10x1 (fine pitch thread) · Total height: 70 mm · Depth: 50 mm
EUR 73.50
Moped fans like you also bought:
Fuel tap vertical M12x1 (with union nut) outgoing right | Piaggio SI
Manufacturer: Made in Italy · Possible lever positions: open / closed / reserve · Material lever: Plastic · Filter type: Plastic net · Installation direction: vertical / vertical · Outlet direction: right · Spare tube shape: straight · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 65 mm · Mounting type: Union nut
EUR 15.40
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm · Color: black
EUR 24.40
swiing® revival clamping screw rear brake | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Number of components: 3 pcs · Ø Cable bushing: 2.1 mm · Total length: 21.5 mm · Screw head: Hexagon · Thread length: 11 mm · Drive: External hexagon · Ø shaft: 10.5 mm · Width across flats SW: 11 mm · Width across flats SW: 14 mm · Thread type: M7x1 (standard thread) · Alternative version of the Piaggio OEM number: 154533
EUR 7.15