Unshielded spark plug connector made of hard plastic for your moped, scooter, and small motorcycle.
The spark plug wire is inserted into the guide. The pointed pin, which is made of brass, is screwed into the spark plug hole, securing the spark plug wire and establishing contact.
Since the spark plug connector has an M4 mounting thread, the end cap on the spark plug must be removed.
Spark plug wires with a maximum diameter of 7 mm can be used.
When using an electronic ignition system (HPI, PVL, Selettra, etc.), a shielded spark plug cap should be used. You can find spark plugs, ignition wires, and alternative spark plug connectors compatible
with this spark plug holder in the accessories section.
A high-quality product manufactured in Italy.
| Ø cable | 5 mm, 7 mm |
| Manufacturer | Made in Italy |
| Material | Plastic |
| Color | black |
| Spark plug socket | M4 |
| Cable available | No |
| Suppressed | No |
| Subcategory | Spark plug connector |
Accessories & related products
Nos
Hot 
BERU Spark Plug Connector, 1 kΩ, Noise-Suppressed, NOS
Ø cable: 5 mm · Ø cable: 7 mm · Manufacturer: BERU · Material: Sheet metal (steel) · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Color: silver · Resistance: 1000 Ω · Subcategory: Spark plug connector · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 12.20
Moped fans also bought
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing type: Shoulder bearing · Stock number: E15 · Inner ring width: 8 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing clearance: CN (standard) · Bearing cage: Brass cage ball-guided · Groove ring: No · Material: Brass · Material: Steel · Ø inside: 15 mm · Ø outside: 35 mm · Width: 8 mm · Area of application: Standard · Pony OEM number: A1149 · Sachs OEM no.: 0232 017 006
EUR 30.60
NewFren clutch plates | Sachs 50/2, 503 2AL/2BL (A3887)
Manufacturer: NewFren · Material: Composite materials · Material: Steel · Recording type: Interlocking · Number of slats: 2 pcs · Thickness: 3.3 mm · Ø inside: 30 mm · Ø inside: 36 mm · Ø outside: 93.8 mm · Area of application: Standard · Pony OEM number: A3887 · Sachs OEM no.: 0659 010 006
EUR 35.60
swiing® revival gasket 0.4 mm gearbox cover | Sachs 502, 50/2, 50/3, 50/4 (A1827)
Manufacturer: swiing® revival parts · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Total length: 210 mm · Number of fixing points: 5 pcs · Width: 130 mm · Thickness: 0.4 mm · Pony OEM number: A1827 · Sachs OEM no.: 0250 087 100
EUR 7.25
swiing® revival engine seal | Sachs 502, 50/2, 50/3, 50/4 (A1828)
Manufacturer: swiing® revival parts · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Total length: 250 mm · Ø inside: 86 mm · Number of fixing points: 16 pcs · Width: 170 mm · Thickness: 0.4 mm · Pony OEM number: A1828 · Sachs OEM no.: 0250 088 100
EUR 7.25
Oil seal FPM 15/30/7 B DUO | Sachs 50/2, 503
Shaft seal type: B DUO - With sheet metal outer casing / two sealing lips. · Manufacturer: Sachs · Material: FPM / FKM (colloquially known as Viton) · Ø inside: 15 mm · Width: 7 mm · Temperature resistance (min.): -30 - 200 °C · Ø outside: 30.1 mm · Pony OEM number: A1830 · Sachs OEM no.: 0250 090 000
EUR 9.75
Hot
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Bearing type: Deep groove ball bearing · Stock number: E15 · Inner ring width: 25.6 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Bearing cage: Sheet steel cage ball-guided · Material: Steel · Ø inside: 15 mm · Width: 8 mm · Thread type: MF20.8x1 LH (fine/left-hand thread) · Ø outside: 35 mm · Area of application: High End · Area of application: Standard · Pony OEM number: A2531 · Sachs OEM no.: 0286 079 105
EUR 61.40
Working late? Evening hours on Thursday until 20:00
