Grip set made from a soft, gray rubber compound.
The Piaggio logo is embedded on both grips.
The grip set consists of two grips with an inner diameter of 22 mm. It therefore requires some effort to get the grip over the throttle grip.
However, the material is quite soft and stretchy.
Length of the grip pull (measured from the inside): 13.4 cm
A quality product made in Italy.
Manufacturer | Made in Italy |
Material | Rubber |
Color | gray, white |
Total length | 134 mm |
Ø inside | 22 mm |
Universal | |
Piaggio |
Moped fans also bought
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Nipple length: 5 mm
EUR 3.45
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Cable length: 2200 mm · Nipple length: 10 mm
EUR 2.95
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
EUR 12.10
EUR 26.89/l
GPO 85° carburetor pipe bend brass M6x0.75
Manufacturer: GPO · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Thread type: MF6x0.75 (fine pitch thread) · Total length: 45.5 mm · Total length: 53.5 mm · Height: 30 mm · Internal thread: MF6x0.75 (fine pitch thread) · Ø outside: 6 mm · Angle: 85 ° · Width across flats nut: 8 mm · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 7.25
Handlebar fork plate 35 cm curved with chrome strut
Manufacturer: Made in Germany · Material: Steel · Color: Chrome · Surface: chrome-plated · Fork plate holder length: 90 mm · Width: 720 mm · Mounting type: Fork plate · Height: 350 mm · Ø outside: 22 mm · Length handlebar ends: 150 mm · Clamping diameter: 22 mm · Crossbar: Yes
EUR 41.10